Charging performance test with laptop powered-off. Actual charging time may vary in real world conditions. The stated 2.5mm width of the side bezel is the distance between the edge of the non-active screen display area and the inside edge of the case. If the case width is included, the side bezel width is 4.1mm. Measured based on standard (anti-glare) display configuration. The top bezel width is 6.2mm and the bottom bezel width is 10.9mm. Prepare the USB drive: Make sure the USB drive has the necessary bootable files for the operating system you want to install.

A great option is HP Laptop 15S, which features Windows 11, an AMD Ryzen™ 5 5500U processor, 8 GB DDR4-3200 SDRAM, 512 GB SSD, and additional features. Our 15S model is also one of the best laptops for students thanks to the prolonged last battery life, speed, screen size, and range of other great benefits. Building your business? Don't do it without HP business laptops Remove the battery: Gently pull the battery away from the laptop and lift it out of the compartment. In Windows Settings: Go to "Settings" > "System" > "About" and look for "Device specifications". The serial number should be listed under "System Model". Save and Exit: Once you have made the change, save the changes and exit the BIOS. Your HP laptop should now use the Fn key as the primary function key Enter the BIOS: Restart your HP laptop and press the "Esc" key repeatedly until the Startup Menu opens. From there, select "F10" to enter the BIOS.In the BIOS: Restart your HP laptop and press the "Esc" key repeatedly until the Startup Menu opens. From there, select "F10" to enter the BIOS. The serial number should be listed under the "System Information" section. Selection screenshot: Press the "Windows" key + "Shift" + "S" key. This will open the Snipping Tool, which allows you to select an area of the screen to capture.

Look at the laptop's casing: The model name is usually printed on a label on the bottom of the laptop. Navigate to the Function Key Behavior: In the BIOS, look for the "System Configuration" or "System Options" section. From there, select "Function Key Behavior" and change it to "Function Key".If you are using an HP laptop with a touch screen, you can also take a screenshot by using the Windows Ink Workspace. Simply press the "Windows" key + "Volume Down" key to take a screenshot.