Though this was thought fixed in 1.03, a further issue was discovered whereby seemingly randomly, channels or scheduled recordings could be removed during the Automatic Service Update in standby. This could happen in locations receiving signals from multiple transmitters with signal variations.

The SX will always detect the availability of HD alternatives. Previously this was not the case because some broadcasters are not reliably using the official method to signal them. V1.02 introduces an improved way to detect them.

Fixed an issue that could cause the audio to go out of sync in live pause mode after using fast forward or rewind. When making a regional selection during Installation, the wrong regional services could be selected.

When RF Loop Through in Standby was enabled in the System section of Settings, disturbances in the output could be observed for a few minutes after entering standby. Fixed an issue that could cause intermittent video freezing/stuttering with high-bitrate HD recordings. This Manhattan SX FREESAT HD replacement remote control is manufactured by Classic. Classic have been the leading manufacturer in quality replacement remote controls for TV, Hi-Fi and other electronic devices for over 20 years. After discussion with Arqiva (who manage the UK’s broadcast infrastructure), we implemented improved behaviour on our latest T3-R model. This behaviour has now replaced the Automatic Service Update on the T2-R: When there are regional variants of channels stored, e.g. BBC ONE NE at channel 1 and BBC ONE WALES at channel 800, the system will always prioritise the primary channel for recordings.And of course, switch channels, adjust the volume, access content and navigate on screen menus at your leisure. Feel free to turn up the volume as loud as you like, you’re in control! All the functions of the original remote control that came with your Manhattan SX FREESAT HD (excluding reprogrammable buttons, voice or pointing features) The system can now be restarted in the System Settings menu and by pressing: Red - 0 - Red - Standby.

Add Reminder” could be shown for a programme on now instead of “Watch” and pressing OK would display error “Unable to set wakeup timer for current event”. Fixed an issue when using the T2-R with a Pioneer VSX-920-K AV receiver that caused the audio to be lost. When your SX is turned on, the LED on the front is blue. The correct input on your TV is not selected

100% SECURE SHOPPING

Record up to 4 things at once: Record up to 4 shows at the same time if your satellite dish has a wideband LNB – for more information on cabling, LNB type and how many shows you can record visit freesat.co.uk/help.

An issue that could stop programmes being set to record that are on now on a service that does not broadcast 24/7 (e.g. BBC FOUR). The recording could only be scheduled after changing to a service on the same multiplex. The TV Guide now indicates in the info area when a programme is running late, starting late or has started early.

Previous Updates

When retune events were signalled by the broadcasters you could be prompted to retune more frequently than necessary. The SX did not automatically detect the maximum resolution of a TV connected by HDMI and instead would set it to 1080i. The instruction text in the Channels Editor (e.g. used for editing Favourites) could incorrectly say ‘select channel’ when it should say ‘deselect channel’ and vice versa. Your SX will update automatically overnight whilst in standby, as long as you haven't disabled automatic updates in the System Settings menu.