Internal Applications: Typically used in situations that will not be exposed to moisture, you should choose a panel that has a technical class of EN636-1S and has an EN314 Class 1 bond. The edges of most panel types are more porous than the panel surfaces. As a result, absorption at the edges is greater than on the face and if panels are subject to a changing humid or exterior climate, care must be taken to ensure that the edges are adequately sealed. In marine use there are specialist Sika adhesives and a variety of epoxy resins. The resins are normally applied to a minimum depth of seven coats. Marine Ply Uses and Applications Manufactured from selected Gaboon (Okoume) veneers throughout, it has an attractive close grained face which is perfect for varnishing and finishes well. There are stringent requirements on face and core veneers, they require solid surfaces free from open defects and stipulations on the nature and frequency of knots. These high quality veneers are then bonded using a resin to meet bonding Class 3 of BS EN 314-2 Plywood, in most circumstances this would be a phenolic resin or a modified melamine-formaldehyde resin. Importance of the finish Roofing and Ceiling Applications: In certain building applications, 6mm marine plywood may be used for roofing and ceiling applications where a water-resistant material is needed.

Craft and DIY Projects: Like its thinner counterpart, 4mm marine plywood, 6mm marine plywood is often used by craft enthusiasts and DIY hobbyists for various creative projects and small woodworking tasks. The first choice for many renowned boatbuilding craftsmen for its aesthetic qualities, Super Elite Plus is made from multi-laminate Sapele veneers for stability, and has extremely high quality rotary cut Sapele faces. It has a superb fine sanded face veneer face quality and is ideal for epoxy coating, clear finishing or painting. Looking for alternative plywood? We have a range of different options for you to complete your project. Shop our plywood collection or explore each category: Suitable for marine use, but not for immersion in water, only for water resistant and high moisture.To keep your marine plywood in good condition, avoid exposing it to prolonged moisture and direct sunlight. Regularly clean and apply protective preservatives to keep it waterproof and prevent warping, delaminating, or splitting. Can marine plywood be used for outdoor projects?

mm (3 ply) / 6 mm (5 ply) / 9mm (7 ply) / 12 mm (9 ply) / 15 mm (9 ply) / 18 mm (11 ply) / 25 mm (15 ply) EN636 - 3 (Class 3) Defines that the product is made from timber that is durable ( hardwood throughout) and is suitable for all exterior applications including frequent wetting. Prolonged use in an external application would require boards to be covered or decorated. At Howarth Timber & Building Supplies, we sell a wide range of plywood sheets. Knowing which one you will need will depend on a few factors: Furniture Making: 6mm marine plywood is utilized in the construction of lightweight furniture items like side tables, shelves, and bookcases, offering both durability and a sleek appearance.Where appropriate types of wood-based panels are used, for example as external cladding, infill panels or soffits, it is important that the finish applied is suitable for external use and provides the required protection to the panel. Paints and stains formulated for external use on natural timber can be used on wood-based panels. Wall Paneling: For interior wall paneling in areas where moisture might be a concern, 6mm marine plywood can be used to add a decorative touch while ensuring durability.