Hands-On Expertise & Collective Knowledge: Our team boasts extensive DIY experience and in-depth knowledge.

Industry Connections: We maintain close ties with manufacturers and brands, offering insights into trends and upcoming products. Mix the filler in the ratio of a GOLFBALL to a PEA. So a golfball sized glob of filler should be used with a pea sized squirt of hardener. Obviously you don’t have to use that much but if you keep the ratios the same that should work. The ratios aren’t that critical. Mix the filler for 20-30 seconds before use. As this is a catalytic reaction between the filler and hardener the mixing isn’t too critical as long as you’re not left with visible unmixed hardener you should be fine. If it’s very cold or the filler hasn’t been mixed so well it will take longer to set. Using a folding action, mix a golf ball equivalent volume of Ronseal Wood Filler, approximately 38mm diameter, with an approximate pea-sized amount of the catalystIn America ‘Bondo’ by 3M is a common brand but please correct or add additional brands in the comments of the video above! I mainly use Bonda Decor Fill in the UK. Apply Ronseal High Performance Wood Filler with a filling knife, working well into the damaged area, and removing any excess Deep holes should not be filled with the one part wood filler in a single operation due to the risk of excessive shrinkage and crumbling of the dried filler Regular Updates: Our recommendations stay current with any changes in product performance or availability. H226 - Flammable liquid and vapourH332 Harmful if inhaled.H315 Causes skin irritation.H319 Causes serious eye irritation.H361fd (Fertility and Unborn child) Suspected of damaging fertility. Suspected of damaging the unborn child.H372 Causes damage to organs through prolonged or repeated exposure.

I use 2 filler knives – a 1.5″ knife and 3″ knife. I keep these VERY sharp as it gives a better final finish on the filler. I clean & sharpen them using my belt sander however you can just use a piece of sandpaper. I just use scraps of laminate flooring as a mixing palette. Comprehensive Research: Our team dedicates extensive time and effort to research and analyze products, so you can make informed decisions. Once you’ve sanded it, prime it with an appropriate undercoat (I normally use Leyland Acrylic Primer Undercoat on woodwork) and then use your top coats as normal.

Independent: We will tell you exactly what we think of a product and we would never recommend anything we wouldn't use ourselves. A range of two-component fillers formulated for use on metal, GRP and timber for interior and exterior applications. They are also suitable for repairing damage to corners and edges of furniture and are supplied with a separate hardener. The standard range consists of a selection of the most widely used wood