Electromagnetic Galvanising uses electrolysis to draw zinc and chromate onto thesurface of bright steel. The result is a thin galvanised layer with a smooth finish,typically up to 10μm (microns) I’d now like to take you into the fascinating world of ……wait for it………Brads! (and Pins!!) Yes, you can’t believe it can you? You’ve waited all this time and, finally, it’s what you’ve been searching for your whole life, your Holy Grail is here right at your fingertips……….No? Seriously though, there is a lot of confusion around size and gauge of brads and pins and even the regular user of nailing tools still have confusion around nail gauges. So why don’t we take the lid off and give a little clarity to the murky world of brad nails?! Finishes: Food for thought maybe?…………Less is sometimes more. Well, I could continue into the various types of nails for heavier duty nailing, but enough for now. lookout for this majestic piece of information in a future enlightening post. Here’s looking to your next Holy Grail. Sharing is Caring: Need to ask us a question? Call us on 0333 8000 345 and ask for an expert. Or, drop us a line here. Gauge Finish Nails are available from us in straightor angled ( 20 Degree) formation with the latter suitable for Dewalt and Paslode Finish nailers. The range of leg length sizes varies from 20mm to 64mm with the angled available from 32mm to 64mm. Finishes in either galvanised or stainless steel. The following video compares 16 Gauge to 18 Gauge.

Made from Austenitic Stainless Steel (A2-304) meaning these can be used in hardwood, corrosive wood and outdoors in moderate salt atmospheres. Gauge BradsStepping up the next rung up the ladder, we have the very popular 18 Gauge Brad (1.25mm in diameter) finished with a head. These are found in most joinery workshops and are used in moulding, decorative trim, furniture manufacturing, window beading and much more. Available on our range in 18 Gauge Galvanised Finish Nails and 18 Gauge Stainless SteelBrads. Headless Pins The finest pins in our range and are 23 Gauge. (0.64mm in diameter) They have (you guessed it!) no head, and are fantastic for beadings and mouldings and because they’re headless, the finish is almost invisible…………. No unsightly wood fill. Sometimes referred to as a Micro Pin. They’re becoming more popular and surprisingly, give a lot of holding power. (although glueing is still advised) It’s currently available on our range in lengths from 12mm – 28mm.With the stronger shank and larger head these finish nails are used for fixing skirting and architraves. Downside of Using a Finish Nail

ATRO – TIP / BEA – SK400 / BOSTITCH – BT1200 / DUO-FAST – HB/60 / HAUBOLD – SKN16 / KIHLBERG – 516 / OMER – BRADS 14 / PASLODE – F16 / PREBENA – N / TACWISE – 16G Although there are some debates around the classification of what constitutes as a brad nail. As far as we are concerned (20 years plus in the industry) a brad is either a 21 Gauge or 18 Gauge Nail. Benefits of Brad Nails Unsure if the 16 Gauge are the right ones for you? Here are some equivalent brand codes which are a match to these finish nails:Well, following my previous post on staples, which also explains about finishes in both Stainless Steel and Galvanized. Fasteners: