Make sure that the remote controller and aircraft batteries are fully charged. (It is recommended to fully charge the battery and then fly the drone.) Communication: Intelligent flight batteries transmit information on voltage, capacity, and current to the aircraft. These data can be seen in the DJI Fly app.

If a PD fast charger is currently not available, you can also use a charger with a Type-C port for charging, but the charging speed may be relatively slower. So, if you want to use additional batteries, here is a table that will help you determine how long they will need to charge: Number of Batteries Due to its larger capacity of 3850 mAh (compared to the standard battery’s 2453 mAh), the Plus battery takes a little longer to fully charge. Overcurrent Protection: The battery will immediately stop charging if an excess current is detected. DJI Mini 3 does not have internal storage. It is recommended that you install a memory card to save the raw materials taken by the camera.The combo does not come with a microSD card. DJI Mini 3 supports up to 512 GB cards, and it is recommended that you use the following ones. That is all for today, pilot! We hope that you have a better understanding of how to properly use your DJI Mini 3 Pro batteries.

DJI Mini 3 Propeller Holder: The Propeller Holder secures and protects the propellers for safer storage and transportation. The battery will enter hibernation mode if depleted and stored for an extended period of time. Recharge the battery to bring it out of hibernation. In terms of connectivity, there’s a single USB-C port on the drone’s rear for transferring files or recharging the Mini 3 Pro’s battery. Next to it is the microSD card slot, which can handle cards up to 512GB. Underneath this sits the battery – which fits securely, but is easy to remove and replace. Like the Mini SE and Mini 2, the Mini 3 Pro has been specifically designed to weigh less than 250g in flight. So, at 249g when loaded with a microSD card and Intelligent Flight Battery, it falls into the category of drone that under UK law can be flown in public places, within 50 metres of people and above people.Press the power button on the aircraft and remote controller for one second respectively, and the status LEDs will light up. When only one LED is on, please charge the device in time. Flying in severely cold weather, 14° F to 41° F (-10° to 5° C), drastically reduces battery capacity. Before starting your drone’s operation, hover still for a bit to heat the batteries and prepare it for whatever task you have in mind. When using DJI RC-N1 remote controller with your mobile device, you can live stream with your DJI Mini 3 via DJI Fly. Live streaming is not available when using DJI RC. Connect the two-way charging hub to a power outlet using the official DJI cable and charger, such as the DJI 30W UBS-C charger.

The Mini 3 Pro has a much-improved camera in comparison to its predecessor. While it isn’t able to offer the gloriously rich 10-bit footage you can capture with larger drones, it’s certainly the best we’ve seen so far from a sub-250g model, and super-impressive considering the tiny size of the camera module. Do not fly the aircraft near areas with magnetic or radio interference, including Wi-Fi hotspots, routers, Bluetooth devices, high-voltage lines, large-scale power transmission stations, radar stations, mobile base stations, and broadcasting towers. Otherwise, the wireless transmission performance of the aircraft may be affected by interference, and the aircraft cannot fly normally.The use of a dry powder extinguisher is the correct method for putting out this kind of fire. The fire and any oxygen it has will be smothered by this extinguisher. DJI builds a geofence system into its drones, FlySafe. The system warns you if you are trying to take off in restricted airspace or if you're entering it. It's effective in practice; I live near a small local airport and the app lets me know if I'm about to stray into its airspace. Additionally, if you want to make sure the drone stays within a certain distance you can set a custom geofence distance in the app. Hibernation mode: The battery enters Hibernation mode to prevent over-discharge of the battery cell voltage to less than 3.0 V or the battery level to less than 10%. You must charge the battery to start it up.