Aqua Mix Sealer's Choice Gold, a world-wide best seller, is a premium, no-sheen, natural look, water-based penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas.

I'm very put off that it needs 10 coats and am a little confused why they didn't tell me this (they mentioned 'a couple' of coats) and why they would sell me ONE quart when it needs at least three quarts. It is a low VOC, water based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas.Using this product on a regular basis will safely remove soiling and help prevent a stubborn build up without damaging the tile, grout or sealer.

Aqua Mix® Reviver® – Designed to bring back the life and beauty to dull, scratched, or etched and neglected calcium-based natural stone. The Stone, Tile or Grout must be dry before applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application.travertine – Travertine is a form of limestone deposited by mineral springs, especially hot springs. This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety. Do you have a suggestion for what to use next and if o Csm apply it on top of this coat that currently shows no sealing? It has all the things you want to hear like no VOC’s (great for the environment), it’s water-based (easy to use with low odors) and can do more things than a swiss army knife.

Apply sealer according to directions after the tile has been bonded for a minimum of 24 hours, or apply to the front face of tile before installation. It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. I did applied the penetrating grout sealer with a sponge in accordance to manufacturers specifications.

EINECS is the European Inventory of Existing Commercial Substances and its EINECS numbers are displayed as 2xx-xxx-x. Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. Another issue I'm having with our tile is that I have sealed our Gray Foussana stone for the master 4 times and it is still isn't properly sealed.

The tile guys sent us more sealer - we applied one coat, and so far the problem seems to have stopped. Precautionary Codes may be found in the "Advanced" version of Chemical Composition / Ingredients tables. The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application.

Suitable as a sealer or grout release for all natural stone surfaces, unglazed tile, porcelain, clay pavers, concrete, brick, masonry, and grout. It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Most sandstone is composed of quartz and/or feldspar because these are the most common minerals in the Earth’s crust. It was exciting to see how the sealants would hold up against common stains and sharing those results to consumers like you.