The Vigor 167 is VDSL2 35b and ADSL2+ modem to Ethernet bridge, connecting VDSL or ADSL to your Ethernet-based Router or Firewall. It provides proven compatibility with UK VDSL2 and ADSL2+ networks. a. My SNR up and down is 12dB (which is probably a stability profile). Is there a Telnet command to drop this (as in earlier Draytek boxes)? I did some exploring but couldn't find any "vdsl snr" equivalent. b. The default Modem Code is 5.12.24.0. However, it is possible to select two other Modem Codes, being:

DrayTek Latest Firmwares | DrayTek

Thanks very much for the replies – indeed, this is what I was missing. With 192.168.1.10 set as the laptop static IP, subnet mask 255.255.255.0 and gateway 192.168.1.1 it all worked fine. Have updated firmware to 5.0.1 now.Ideal partner device for DrayTek dual-WAN products or any other vendor's Ethernet WAN firewall. Reports DSL Line Status on DrayTek Vigor routers.

Vigor167 | DrayTek Vigor167 | DrayTek

I've been running one for the last 4-5 months, and been happy. It has been syncing well and seems to have been quite reliable. I got it to replace a box that apparently couldn't handle "SOS". Hi folks and Mr Dreytek, I've just replaced a DM200 (which was apparently confusing poor Mr NBN due SRA ?!?!) with a Dreytek Vigor167. Upgraded it to latest software (5.2), connecting was easy enough, and all seems to happy.

Did you know we can configure this item prior to shipment meaning it will automatically work out of the box. Using our TR-069 provisioning platform, we can pre-configure generic and customer specific settings prior to despatch. View more information about our router provisioning. So your OPenWRT router is a client to the Draytek on one of the LAN ports. SO Draytek allocates and routes to it via LAN1.

DrayTek Vigor167 | DrayTek

The only means of running the second "router" ...with all devices on that having same network as the primary... is to disable the routing and DHCP functions, turning it into a switch. Any wifi features are tied to the switch so nothing to configure there. The DrayTek Vigor 167 is compatible with all current UK VDSL2/ADSL+ networks and has been extensively tested to provide a robust and reliable DSL connection. In the delivery state, the Vigor167 is set as a pure modem so that the VLAN tag 7 is set by the modem. Your subsequent dial-up router therefore no longer needs to set a VLAN tag. If your ISP uses a different VLAN tag, please change the value of the VLAN tag in the modem's web interface accordingly.Something that caught my eye is there seems to be 2 G.Fast options, since i don't know what's what I've left as default... As I understand it, the Draytek is connected via its modem to FTTN and the routing/switching function is active on all the LAN ports. I changed modem code to 5.12.18.16 and the FTTN 50/20 connection has been up for 31hrs. My NBN connections typically stay up for 1 to 4.5 days (ADSL2 despite being slower was so much more stable than NBN).

Draytek Vigor 167 : r/draytek - Reddit Draytek Vigor 167 : r/draytek - Reddit

Oh that's pretty interesting. I like the idea of squeezing more speed, although at 1,100m from my node there probably isn't much I can do anyway. I am using the same DNS, same router (vigor just set up as a bridge modem, same as the old TP-Link). The Vigor 167 can be setup as a standalone VDSL modem to pair with existing Ethernet WAN routers/firewalls or it can be used as a basic router.

I want to get a reasonable bridge modem that ideally supports SOS, so I was trying to decide if Vigor167 is a good substitute for Vigor130. Extensively tested to meet your expectations, the Vigor 167 provides a reliable and secure DSL connection and is compatible with all current UK UDSL2/ADSL+ networks. Although I wonder for if having SOS will be beneficial for me as I'm quite far from my NBN FTTN node and only sync at 25/6 Mbps.