Ive used demon shine in the past and was very cheap and worked very well help dry the car and add some shine However i only used it via the original spray bottle so it hurt my hand haha after going over the whole car with it...but i didnt think of applying it via foam lance to be honest.. We would strongly recommend not using more than 40ml Polar Seal and 200ml water. Over use may cause white spotting and significantly compromise the effectiveness of Polar Seal. Using more product will not improve the depth of shine or increase its durability. Why is it not recommended to use on the windscreen? It is a coating designed specifically for use in a pressure washer. It is the coating element (third and final stage) of the three-stage Polar range process. It is preceded by the prewash – Polar Blast and shampoo – Polar Wash. Is Polar Seal wax safe? Polar Seal contains silicones, which in some cases, can create smears once wiper blades are used on the windscreen. We would recommend cleaning your windscreen after you have applied Polar Seal to the rest of your car as part of your car cleaning process. How long should I leave Polar Seal on my paintwork? Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.

More items to consider

Polar Seal is a very protective coating that has been specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface which reduces the time it takes to dry the vehicle. Simply spray onto a clean, wet surface, rinse off and dry to leave behind a durable, high gloss finish. Features & Benefits: We would recommend that only the product needed for a single application is used. We also recommend that the foamer bottle is rinsed thoroughly after use. We recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork. So it sprays on easily and evenly via the foam lance and then on to rinsing. It rinses really easily and leaves amazing gloss.

div>

Wax on, wax off! Don’t let all your hard work go to waste. Adding a layer of wax or polish to your car will help to fend off any nasties that could land on the paint, whilst protecting your car from UV rays. Use the Autoglym Polar Seal to give your car a protective, hydrophobic coating that will leave it looking glossy in no time.We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination. Thoroughly rinse and dry your car to reveal a high-gloss finish that is protected with a hydrophobic coating. The car must be dried with a cloth and not allowed to air dry as water spotting may occur. Keeping your car exterior clean is a great way to take care of the aesthetic of your car as well as its longevity. Follow our step by step guide. Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.

Being a massive Autoglym fan and the fact they released Polar Seal a week or so ago, I hankered after getting some of this and giving it ago.

Yes, apart from the front windscreen we would recommend Polar Seal can be used on all exterior surfaces. Is it ok to leave Polar Seal in my foamer bottle? Polar Seal is pH Neutral and can be used on full exterior of the vehicle, avoiding the windscreen. Do I use Polar Seal instead of a wax? Do let the contours of your car guide you on which way to wash. Try not to wash in circles and avoid those cobweb-like scratches! I did also buy some Polar Wash, but with the weather being so cold I decide against using it as the pressure washer will dump a lot more water on the ground than 2bm. So I followed with AG Pure Shampoo then a rinse.