Due to the UK leaving the EU, some of our delivery partners have changed the way we ship to international and offshore destinations. This means that for the time being we are unable to ship items to these locations.

Enable your Bluetooth device to search for a new device to pair with. Select 'YU4 by Kanto' from the list of Bluetooth devices available for pairing.

🍪 Privacy & Transparency

Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation. Press the Bluetooth button ( ) on YU4's remote to select it as the input source. The Bluetooth LED (blue) will flash to indicate that YU4 is in pairing mode. The YU4 is designed to provide the best quality sound with its enhanced drivers and dome tweeters. The cabinets are handcrafted to make sure you get the best results each time. It connects to almost all audio equipment including a vinyl record player and it can also connect wirelessly via Bluetooth to any smartphone, tablet, or PC.

We recommend you read all instructions carefully before using the system and keep them for future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or use of this product. We recommend keeping a maximum distance of 10 meters between the speaker and your device. The best signal fidelity is within this range. The YU4 powered speaker system is designed for either bookshelf or stand mounting. The stands should be of rigid construction, between 26" to 32" high. We recommend the Kanto SP26 speaker stands to go with your YU4. The YU4 offers 140 watts of peak power using its built-in Class D amps. Those who have tried the Kanto YU agree that it sounds better than other desktop or bookshelf speakers. The audio sounds rich and loud, making the room look and feel spacious. Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.Push the knob to select an input source - it cycles through the following inputs depending on what input source was last used. When connecting audio cables the ON/OFF Switch must be turned OFF. After connecting all cables, the unit can be turned ON. While the speaker can be paired with more than one device, only one device can play and transmit audio signal at a time.

If you do not find the Auto Power-up (APU) feature useful, you can disable it by pressing the Balance Reset button on the remote and holding it for 5 seconds. The Status LED will blink once to indicate that you have disabled the APU feature. To enable the APU if you have disabled it, simply press and hold the Balance Reset button again for 5 seconds. The Status LED will blink twice to indicate that you have enabled the APU. Take note of the following behavior and functionality during Bluetooth operation. When you are successfully connected, the Blue LED will be lit solid, and your device will show as connected to 'YU4 by Kanto'. Set the volume of the source to its highest level. Low source volume can negatively affect dynamic range. Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance. Here is a scaled size comparison of these two speakers to give you an idea how their external dimensions compare:If your turntable does not have a built in Phono Pre-Amp, use the "Phono" setting on the Phono switch.