Porous, or ‘thirsty’, surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 500ml tin will provide less than 3.5m 2 of full coverage. If you apply the paint too thinly, durability may be affected.

Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete. Rust will need treatment, whilst any algae, mould or moss should be removed. These can generally be removed with outdoor cleaning solutions. Most importantly, always wear protective gear, including a mask and rubber gloves, when cleaning mould. What do I need to paint a wooden door? Finishing Coatγια επιπλέ0ν προστασία σε ντουλάπια κουζίνας, έπιπλα μπάνιου, δάπεδο, και τραπεζαρίες. Porous, or ‘thirsty’ surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 750ml tin will provide less than 6m2 of full coverage. If you apply the paint too thinly, durability may be affected. I get lots of comments from people who are amazed that it’s possible to paint uPVC as it’s made of plastic. As you can see, it is possible, but it does take time and patience. If you’ve ever wondered how to makeover your uPVC front door using paint, read on for my guide on how to transform an old plastic front door.Now it’s time to get painting! You might like to watch our video guide to painting UPVC doors as the painting process is the same. Self-priming – no primer or undercoat required for any surface except bare metal (in which case use a suitable metal primer) Give the door and sides a good scrub with the sugar soap solution and a sponge/cloth to remove any traces of dirt and grease. Rinse off thoroughly, then allow to dry (remember, wood can take quite a while to dry, especially if the weather is damp or cool).

I went to our local decorator centre and asked for advice. The recommended Zinsser All Coat Exterior Satin paint with built in primer and gave me an exciting colour chart for me to choose from. They mixed it to my chosen candyfloss pink and I am delighted with the colour. Make sure you keep your dust sheet down. Spillages do happen, and it’s easy to tread door paint all over the place before you know it! A 750ml tin will provide a single coat of up to 12.5m2. For a durable finish, a minimum of 2 coats is required, so your 750ml tin should provide full coverage for just over 6m2 on non-porous surfaces like laminate or metal. Limited Edition 500ml tins will provide a single coat of up to 8.5m2.

Ensure surfaces are in suitable condition for painting and clean, dry, free from wax, grease of penetrating substances and in sound condition. If previously painted, remove loose or flaking paint. Fill any holes/imperfections with a suitable filler.