ports, including both Nvidia’s RTX 4000 series GPUs, like the RTX 4080 and 4090, and AMD’s RX 7000 series, including the RX 7900 XT and XTX.

Single-link DVI only – Since DisplayPort dual-mode operates by using the pins of the DisplayPort connector to send DVI/HDMI signals, the 20-pin DisplayPort connector can only produce a single-link DVI signal (which uses 19 pins). Although the latter of those DisplayPort standards is not in use as much anymore, it’s still perfectly usable for many mainstream resolutions and refresh rates and will be for years to come. Whether you opt for a display with DisplayPort or HDMI, the key factor is compatibility between your GPU and monitors, as both need to support a common communication standard for multiple displays to be connected.A standard DisplayPort connection has 4 lanes, though some applications of DisplayPort implement more, such as the Thunderbolt 3 interface which implements up to 8 lanes of DisplayPort. These connectors differ only in physical shape—the capabilities of DisplayPort are the same regardless of which connector is used. The transmission speeds are also sometimes expressed in terms of the "Link Symbol Rate", which is the rate at which these 8b/10b-encoded symbols are transmitted (i. In general, maximum refresh frequency is determined by the transmission mode (RBR, HBR, HBR2, HBR3, UHBR 10, UHBR 13. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

Choose the right display connection that suits your gaming preferences and elevates your gaming experience to new heights. Officially, the "DP++" logo should be used to indicate a DP port that supports dual-mode, but most modern devices do not use the logo.That gives it enough bandwidth to handle a 4K UHD stream at up to 120Hz with 24-bit/px color, or a 5K display at up to 60Hz, with 30-bit/px color. Its extra-long cable length reaches up to 6-feet from your device, making it even easier to access and set up in any workstation or home office. Unlike legacy standards that transmit a clock signal with each output, its protocol is based on small data packets known as micro packets, which can embed the clock signal in the data stream, allowing higher resolution using fewer pins. As it is an optional feature, support for Adaptive-Sync is not required for a display to be DisplayPort 1. When gaming on laptops, tablets, or smart devices, the choice of connector will depend on the specific device’s outputs.

And there’s the final rub: Which port you choose depends on the capabilities of both your monitor and your video card.

away from a DP computer up to 3,937 feet (1,200 meters) via duplex LC single-mode fiber optic cable. Different ports have different capabilities and compatibilities, so take a look at the back of your PC to see what you have available.

It’s important to consider the requirements of your gaming setup and the specific devices you’ll be connecting to make an informed decision.As one of the world’s leading suppliers of cables, converters and adapters you’re sure to find everything you need here at Lindy Electronics. With Multi-Stream Transport (MST) support these cables are capable of carrying the bandwidth for multiple monitors.