First, the 60cm captive cable provides a bit more to work with if you’re plugging it into the rear of a desktop PC. Using this switch/dock, you can also share a single LAN connection, as the device features one Gigabit Ethernet port. Plus the USB-C splitters are increasingly becoming more useful for transferring and charging information for some of the best Chromebooks, best tablets and best laptops. There are a few ways to reduce the number, though, and if you’re working with multiple PCs but using the same peripherals, a KVM switch will work wonders for your setup’s aesthetics and efficiency. I also have two firewire drives which I use for back up with the appropriate connectors plugged into a USB-C port.

Second, the hub itself takes 15W of power, which means that – even with a 100W USB-PD charger – you may find some laptops not charging at their highest speeds. Gen 1 only, and there’s no USB input for charging or running HDDs, but what you’ve got is fine for connecting USB memory sticks and wired mice and keyboards, and in extended use we’ve had no problems with stability and reliability.We’ve assembled a list of KVM switches equipped with USB-C ports, making them easier to hook up with your monitor and other peripherals. The Cable Matter Dual 4K USB-C KVM Switch is considerably lighter on the pocket and offers tremendous value. When you need versatility, the Elebase USB Splitter allows you to connect up to four devices to a single USB-A connection. The full USB-C signal cannot be 'split', so unfortunately you're not going to find what you're looking for. You can connect the male side of the splitter to an adapter, which can then be connected to a power supply.

com Dual-Laptop USB-C KVM Docking Station combines two handy devices: a KVM switch and a Docking Station. As with most things, you pay more for a higher spec or extra features, so the choice comes down to working out what you need and finding the best hub to meet your requirements.

According to the manufacturer’s claims, you can use this KVM switch for a triple monitor setup using the two DisplayLink DisplayPort and HDMI (Alt Mode) ports. you should probably just pull a consistent single value from the thunderbolt port and then use something downstream of the port to split your power as needed. The cheaper USB-only hubs take their power from the USB socket, which is fine when you’re only connecting, say, a printer and a mouse and keyboard, but might cause you problems when you’re hooking up more power-hungry gadgets. Maybe you want to print photos from your phone on your home printer, or you’re trying to charge up your phone, tablet, and laptop all at once. If switching between many computers, you should look for KVM switches with excellent protection and synchronization capabilities.