The Makita 110v 335mm Circular Saw has a large base with a sturdy body to make for a durable tool. It has been designed based off of the 5100BR, corresponding to CENLEC regulation with further improvements. For example, this model has easier operability, making it ideal for professionals and DIY enthusiasts. As well as this, it has a motor brake function to give you greater control, allowing you to get your desired results. 110V version not supplied with plug. Features and Benefits Before cutting any deepness, you ought to calculate it accurately so you can have an even and fresh-cut. If you can’t alter the edge appropriately, you will wind up wounding the workpiece generally. Altered Dimension of the Depth Setting

The blade’s design, including its geometry, tooth configuration, and overall construction, can significantly impact the cutting performance and determine the achievable depth. The bevel capacity of a circular saw not only affects the angle of the cut but also contributes to the variation in the cutting depth. When you tilt the saw blade for bevel cuts, the effective cutting diameter changes, directly impacting the cut’s depth. As you might already know, there’s Bosch Blue and Bosch Green. Bosch Blue provides heavy-duty tools for professionals, while Bosch Green tools are typically light-duty to suit DIYers.With a larger blade size of 8 ¼ inches, you can achieve greater depths when cutting at a 90-degree angle, reaching approximately 2 7/8 inches. A 6 1/2″ circular saw blade can cut 1 1/2″ of depth when the saw blade is a 45-degree inclination. It can cut a maximum of 2 1/8″ of depth when the saw blade is 90 degrees. Saw Blade Angle the tool is not an Air Compressor/ Air Tool, a Battery/ Charger, an Accessory, or a Petrol or Production Tool Not far behind the 7 ¼″ circular blade is the 6 ½″ saw, at least in terms of popularity. While the blade itself is smaller, it also makes the circular saw lighter and somewhat easier to handle in comparison to larger blades. A 5 1/2″ saw blade can cut a maximum depth of 1 1/8″ when it is in 90 degrees and it can cut 1 3/8″ of depth when it is in 45 degrees saw blade angle. Saw Blade Angle

With its handle to the left of the blade, it’s easy to use – especially with well-placed trigger and trigger release buttons on the handle – and made short work of our test cuts. We liked the saw’s reassuring 3.8kg weight, and it delivered confidence in operation, but it may be too cumbersome for some uses. It recorded 100dB when running freely, and 108dB while cutting. Most circular saws offer the ability to set the cutting depth and the angle of a bevel by adjusting the saw’s angle relative to its baseplate guide. The depth of a cut will vary according to the angle – most saws will be able to cut more deeply when positioned at 90 degrees to the material, while angled cuts won’t be quite as deep. Well, when it comes to the blade size, 12 inches (304.8mm) isn’t the upper limit. There are few table saws on the market with 14-inch blades. The Grizzly G0772 – 14″ (355.6mm) 10 HP 3-Phase Sliding Table Saw is a perfect example of that. Since the manufacturer also offers a 12-inch (304.8mm) table saw known as the Grizzly G0605X1 – 12″(304.8mm) 5 HP 220V Extreme Table Saw, let’s compare the two options to find out if a larger blade always means more cut depth.The most common type of circular saw is the Sidewinder. This device has the motor on the same axis as the blade. The motor moves the blade thanks to a shaft that extends outward and makes a solid connection. The result is a powerful saw that is relatively easy to maintain and use.