The ReST Bed with Gel Grid is an airbed with a 13-inch profile. The firmness of the bed is adjustable from soft to firm, with multiple zones that can be customized to suit your sleeping position and preferences.

Similar to a thermostat in a house, the sensors in the sleeping bag will monitor and regulate the heat. Traditional electric blankets use copper wiring, which may be uncomfortable. However, Bundl doesn’t use copper wiring; it uses a patented carbon heating material that’s comfortable, light-weight, waterproof, and seamlessly built-into the design. Patented carbon heating material. Credit: Bundl An airbed will require some initial assembly. This may include installing the air chambers and connecting them to electric pumps. Thankfully, most airbed brands offer White Glove delivery that includes in-home assembly and a full operating tutorial. Airbeds tend to have modular designs, allowing you to remove and replace individual components as needed. Air mattresses tend to lose air during the night. As air volume decreases, the mattress may feel flat and less supportive. Pressure ulcers, a serious and common complication, place a tremendous burden on the quality of life of older adults. Pressure ulcers are localized injuries to the skin or subcutaneous tissue at the bone eminence under pressure or combined shear or friction [ 1]. The treatment and nursing of pressure ulcers have been a challenge in the nursing field. The incidence of pressure ulcers in the bedridden elderly is high and shows a linear upward trend which is about 17.4% in elder people. In China, more than 20% of the elderly require care and attention in their daily lives, where 20% to 50% of the patients requiring long-term care suffer from pressure ulcers. Pressure ulcers have a long healing period and are painful and the elderly are prone to infection and even systemic failure as they gradually worsen [ 2].The comfort layer material of an airbed depends on the specific model. Traditionally, airbeds have been built with thinner polyfoam comfort layers; some do not have any comfort layer apart from light padding material on the surface. Some newer airbeds are constructed with more comfort layers of latex, memory foam, and other more luxurious materials. Inflation: There are two kinds of air beds: those that have a built-in pump and those that require an external pump. This is something you need to consider when choosing an air bed, as you need to figure out what you’d rather. As you can imagine, a self-inflating air bed is much easier to use on a regular basis - but it’ll also be more expensive. Dual Firmness: Intended to benefit couples with differing preferences, most airbeds allow you to adjust each side’s feel to reach a distinct firmness level. This can result in one side feeling much softer or firmer than the other. You’re an excellent candidate for an airbed if your firmness preferences tend to fluctuate on a nightly basis. Due to adjustable designs and user-friendly controls, airbeds allow you to customize the feel of your mattress rather easily. Most airbeds offer customizable firmness on each side of the mattress, making them ideal for couples with differing comfort preferences. Airbeds are also well-suited to people who frequently experience pain and pressure points and need a mattress that will adapt to their specific needs. What to Look for in an Airbed Mattress This depends on how much your budget will stretch. There are three main types of pumps: a foot pump, an integrated pump or an electric pump. The majority of the top of the range airbeds come with a rechargeable or mains-operated integrated pump. They will also have a remote control that can inflate and deflate the mattress within a matter of seconds.

The air chamber support core has five zones so that you can adjust the firmness under your legs, hips, lumbar region, shoulders, and head. The air chambers are made of medical grade polyurethane that is RF-welded to prevent leaks. This increases the durability of the mattress and ensures consistent support. Graczykowski C (2016) Mathematical models and numerical methods for the simulation of adaptive inflatable structures for impact absorption. Comput Struct 174:3–2. https://doi.org/10.1016/j.compstruc.2015.06.017 For those campers who leave their phone behind because they want to disconnect from the world and truly be in nature, Bundl has a built-in power button that includes four different temperature settings.Serrano Lima M, González Méndez MI, Carrasco Cebollero FM, Lima Rodríguez JS (2017) Risk factors for pressure ulcer development in Intensive Care Units: a systematic review. Med Intensiva (English Edition) 41(6):339–346. https://doi.org/10.1016/j.medine.2017.04.006 air-sac mattress as claimed in claim 1, is characterized in that: described warm-keeping protective layer is connected by elastic connection structure with between warming layer, when after airbag aeration, elastic connection structure is expansible. CN201310611953.7A 2013-11-27 2013-11-27 Airbag mattress Cortés, O. L. et al. Frequency of repositioning for preventing pressure ulcers in patients hospitalized in ICU: Protocol of a cluster randomized controlled trial. BMC Nurs. 20, 121–121 (2021). There is minimal bounce to the ReST Bed. In addition to memory foam in the comfort system, the ReST Bed has separate chambers on each side of the bed. This helps minimize movements rippling from one area of the bed to another. This results in better motion isolation than the average airbed and is beneficial for couples. Serrano, M., González, M. I., Carrasco, F. M. & Lima, J. S. Risk factors for pressure ulcer development in intensive care units: A systematic review. Med. Intens. (English Ed.) 41, 339–346 (2017).

The mattress comes in multiple sizes, but it is not available in twin or full size. The expanded size options include split top queen, king, and California king sizes, along with split king and California king options. In the product form and structure design path of the airbag mattress for pressure ulcers prevention, to avoid pressure ulcers to the greatest extent, the airbag mattress needs to fit the human body to the greatest extent. Therefore, the core technical points of this product are as follows: (i) The longitudinal height, transverse dimension, shape, and distribution of the airbag. (ii) Airbag pressure value to avoid pressure ulcers. (iii) The material of the airbag suitable for the body of the elderly and the pressure demand of the airbag.According to the Sixth Population Census and the 2010 China Aging Development Statistical Bulletin, by the end of 2010, China had fully entered the elderly society, with about 33 million bedridden and fully bedridden elderly in urban and rural areas. By the year 2022, there will be more than 42 million bedridden elderly and more than 29 million elderly who are over 80 years old, accounting for a total of 30% of the total elderly population. With the deepening of the degree of aging, the number of bedridden elderly will undoubtedly increase year by year; along with the extension of the life expectancy of the elderly [ 7], the prevalence and incidence of chronic and recuperative diseases have increased significantly and rapidly [ 8], and various reasons have led to the bedridden elderly with chronic diseases becoming a common phenomenon. It is increasingly difficult to meet the nursing service needs of the bedridden elderly, which must be complemented by equipment and facilities that are more adaptable to home and community-based elderly care [ 9]. Jiang, J. et al. Design and development of an intelligent nursing bed—A pilot project of “joint assignment”. IEEE Eng. Med. Biol. Soc. Annu. Conf. 2017, 38–41 (2017). The feel of an airbed is distinct from that of other mattress types, and is best characterized by the following characteristics: In the design phase, the following steps are performed. (i) Determining the specific data for each design element, including pressure factors, decompression criteria, and ergonomic data for the elderly. (ii) Identifying the materials, airbag size, etc. of the product in conjunction with research on hyperplastic materials and human scale. (iii) Controlling the airbag on the mattress individually, as it is necessary to match the airbag air pressure control system, design the airbag control system, the composition, and connection of the pneumatic device, and determine the inflation and deflation process. 2.2. Decompression Data Collection