As agreed, the plastic tube PA 12HL can also be delivered in such colours as green, red, black, or brown. The lubricants that work best with plastics are based on perfluorinated PFAE, mineral oils, synthetic hydrocarbons (SHC or PAO), and silicone.

WD-40 Silicone Lubricant 400ml - Screwfix WD-40 Silicone Lubricant 400ml - Screwfix

That is why synthetic lubricants, which have a high aging resistance, are the best choice for long-term applications. Regardless of the choice between mineral or synthetic oils, chemical compatibility must still be considered. We’ll get into the details of chemical compatibility later, but a point can be made that lubricants can be beneficial to plastic gears only if the proper lubricant has been selected for the application. Most plastic gears can run without lubrication; however, using the right lubrication can increase life expectancy and prevent cracks.ULL is a long-term, high performance dry lubricant with anti-static properties thus helps to prevent dust build up. These lubricants provide excellent compatibility even with plastics considered challenging to match. When assessing the thermal stability of a lubricant, the working conditions for your plastic gears will need to be heavily considered. As to some wall thicknesses, the plastic tube PA12HL is too soft; that is why a reinforcing socket (plug-in sleeve) is required for mounting. The ability to offer a good blend between adhesion and plastic surface wetting makes it a prime choice for all lubricants.

Plastic Nylon Tube Semi-rigid PA 12 HL DIN 73378 6mm x 3mm Plastic Nylon Tube Semi-rigid PA 12 HL DIN 73378

This means that contact between the lubricant and the gear will not cause the gear to deteriorate prematurely, which can make pits or cracks on the surface of the gear over a long time. Lubricating materials silicone, PTFE, and graphite are prime choices are plastic gear’s internal lubrication. Lubricants based on silicone, perfluorinated PFAE, synthetic hydrocarbons (SHC or PAO), and mineral oils work nicely with plastics. Our plastic nylon tube is used with lubrication systems from the progressive distributor to the lubrication point or from the re-lubrication distributor or piston distributor to the lubrication point.This can range from corrosion inhibition, stability against extreme pressures, anti-scuffing, and tackifying. As experience teaches, there are not too high pressure rates within the bounds of an automatic centralised lubrication system and the mechanical strains for plastic tube PA 12HL can be classified here as rather small. Registered Company Address: Unit 2 Genesis Business Park, Albert Drive, Sheerwater, Woking, Surrey, GU21 5RW, United Kingdom. However, as gears are made to be used without lubricants, special attention must be given to do’s and don’ts while lubricating.

on Lubricating Plastic Gears, Bearings, and Other Parts Tips on Lubricating Plastic Gears, Bearings, and Other Parts

The lubricants can bring a lot to the table, like excellent compatibility and a wide working temperature range of – -67-218°C. Comma Multipurpose Grease is a lithium based grease of number 2 (medium) consistency with good temperature tolerance. Suitable for hubs, universal joints, chassis, wheel bearings, electric motor bearings and general greasing. When a set of gear teeth come into contact, the point of contact experiences compressive stress, which propagates and moves as the gear turns.

CTG contact treatment grease offers excellent electrical and mechanical properties under the conditions required by today’s automotive and domestic equipment industries. Contact lubricants are specially formulated greases and oils that reduce friction and enhance the electrical performance of current carrying metal interfaces in switches and connectors. By subjecting mineral oils through extensive treatment, synthetic oil is merely a version with significantly fewer impurities and undesired substances. It has a wide range of applications on all types of products such as wheel bearings and universal joints.