Warning: Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling. The truth is – I’ve not really noticed much difference if I’m honest – I feel a much longer time-frame is truly needed to test this option, whilst comparing it to a device with the FØ mode OFF. The kit comes with a 0.8Ω Mesh coil, ideally for MTL and also a 0.3Ω Mesh Z-Coil ideally for more of a Direct-Lung vape and has a 5.5ml capacity.

I actually quite like it however its not the best with moisture as water will just soak in, as opposed to running off the material. The Mod – Overall: The Zenith II tank utilizes the Z coil range by Innokin which enables you to switch seamlessly between sub ohm and plus ohm vaping to fully customise your experience. What’s in the box? Well effectively what this might mean, is that the alternating current can improve the vape experience as it allows current to rise and fall more freely, meaning the power to your coil will not always be the same. When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment. I’ve mostly enjoyed using the Zenith 2 tank as an MTL tank with the 0.8Ω coil but it performs well as a restrictive direct lung vape with the 0.3Ω coil.

What Can We Expect From the Innokin Coolfire Z80 Kit

Cut off the power when firing from 3 seconds to 18 seconds along with displaying the Device Identification number and restoring the device to factory settings. Flavour & Clouds The Zenith 2 tank has a 5.5ml capacity but obviously for TPD regions, this will be limited to 2.0ml – I’m not sure if it’ll be one of those double-lined PCTG tubes or an internal removable silicon bung, but either way I’m sure there will be a way to extend that capacity up to the maximum 5.5ml. The 4 items at the bottom of the screen are quite small so for those who struggle with small lettering, this may be an issue. However the text for these is fairly crisp and bright. The Menu Refresh runs 40% of the power through the coil to draw more liquid in and also helps extend coil life. You can choose auto which will run this for you, or manual and hold the fire button for how long you wish to run this for. I honestly didn’t notice much of a difference at all when using this, but if it extends coil life then I’m all for it. All you need to do to refill this tank is twist the top and fill with up to 2ml of the e-liquid of your choice. As it supports the entire Innokin Zenith coil range, you can choose coils from 0.3 Ohm to 1.6 Ohm. To match sub ohm coils, we’d recommend an e-liquid that’s around 70% VG or higher, which will produce a greater amount of vapour. Whereas, if you prefer an MTL coil, we’d suggest a 50% PG or higher e-liquid. As well as this, you can twist the bottom of the tank to adjust the airflow and find an inhale that’s either tighter or looser.

The tank I think is slightly flawed but superb anyway. It looks good, it’s a piece of quality craftsmanship, and they have made improvements from the original such as being able to remove the glass to clean it and making sure you can put your own 510 drip tip on it. You can use any of the z-coils range which gives lots of choice.The twist to fill works well and the airflow gives a very wide range of options to tailor your vape. If you liked the original Zenith, then you are going to love the Zenith 2 without a shadow of a doubt. I should, by the sound of it, adore this tank and I do, but it’s not quite perfect.It does MTL and RDL well, and the flavour from both coils with the kit is very good indeed. There’s a few other niggles I have with it, such as having to remove the drip tip to fill, plus it’s big for a 2ml tank (not Innokin’s fault though, that’s the TPD monster).I’m not a huge fan of the drip tips either but you can use your own. Admittedly these are just small things and I think it’s a delightful tank indeed, in fact I’d say this is THE best z-coil tank out there for me. The King is dead, long live the King. Available in a range of colours, the Zenith 2 has fully adjustable airflow that allows for true user customisation. Innokin has also changed up the mouthpiece so now you can use your favourite tips! Dropping the airflow down, it gets more restrictive and personally I didn’t find it comfortable or satisfying. The screen itself is quite bright, but I did find it a little difficult to see when out in the sunshine. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.This product allows you to replace the coil of your Prism T20 S clearomizer or your Endura T20 S electronic cigarette by Innokin at the value of your choice (0.8 ohms or 1.5 ohms). Prism S coils are designed to allow organic cotton to be perfectly soaked.

Lets face it, Innokin is pretty good at making high quality products for the masses, and their Platform Series is no exception. The Coolfire Z80 is a great mod, and the Zenith II is a great MTL tank. Which makes this one a great kit. It’s innovative, classy, sexy looking, with a great hand feel and easily some of the best MTL you can get. And the two new modes show a lot of potential, even if I didn’t find a lot of use for FØ mode personally.Pressing power + up shows battery charge, coil resistance, puffs (you can clear the puff counter in this menu) There are a fair few options to consider when it comes to operating the Coolfire Z80 tank, so I’ll try and break it own as simple as possible.

At higher wattage, I found the 0.3Ω coil wasn’t too comfortable so I usually vaped at around 35-watts. I received the Ash Grey variant of the Innokin Coolfire Z80 kit which comes with a matching ‘Gunmetal’ Zenith 2 Tank. Regardless of which tank or dripper I install, I’ve had no gap between the atomiser and the plate. The Front of the Device

Customer Reviews

The standouts here are the FØ and Refresh modes, both of which were first introduced with the Sensis pod mod.