The 1.5-Ohm coil is rated for 13-14 W but in my opinion, you can easily go with 16 W as well. At least Innokin isn’t overrating their coils like other companies. Going higher doesn’t feel right, it gets too warm. At 16 W I get way more flavor than on the lower settings. I changed my liquid to Dinner Lady Apple Pie and it’s working very well even with a higher viscosity. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. Never charge your battery at a higher amp than what is indicated by the manufacturer. To calculate the maximum amp level to charge your battery: This vape tank is (partially) intended for sub ohm vaping. Sub ohm tanks require a greater amount of knowledge and experience to use safely. They use specially designed coils that register below 1.0 Ohm resistance, for use at higher wattages. Hope that helps in the meantime, anything else that comes to mind you want to clarify please ask away.

I had some leaking problem, but it was because I wasn't assembling the tank together correctly. FYI: always screw the bottom ring on without the drip tip screwed in, THEN screw the drip tip in Also make sure that the coil is inserted correctly. Otherwise it may leak from the air holes. The airflow is almost perfect for MTL vaping. It’s a little bit airier than the T20 tank. I would really like to have an adjustable airflow in the future though. The T20S can be paired with either the 0.8 Ohm or 1.5 Ohm coil from the Prism S coil range and both will give a full flavour. 0.8 Ohms will produce a moderate amount of vapour, whereas the 1.5 Ohm version is more discreet and produces less vapour. With the 0.8 Ohm coil we'd recommend an e-liquid with a mix of around 50% - 70% VG and for the 1.5 Ohm coil we'd suggest an e-liquid that's 50% PG or higher. Capable of holding up to 2ml of e-liquid, refilling is made simple thanks to the top filling mechanism that features on this tank. I’ve been a heavy smoker for nearly 40 yrs and to be honest never really had much interest in stopping until my ex pat relative and regular tobacco supplier returned to live in the UK leaving me facing the prospect of having to pay UK tobacco prices! The Endura Prism T20S tank is also available as a separate item for use on other batteries or vape mods.

This kit's single-button operation makes it extremely user-friendly, with no fiddle settings or menus to mess around with. Perfect for the starter vaper, you simply have to hold the fire button, inhale on the mouthpiece and you're good to go. ABOUT THE INNOKIN T20S TANK On infrequent occasions Next Day Delivery can be affected by operational issues with our partners and may arrive later than planned. We cannot be held responsible for operational issues with our partner services, but will operate in line with their policies in such an event The Innokin Endura T20-S starter Kit includes everything apart from E-liquid to get you up and running. Plus some spares to help you maintain it. Well so far after around 4-5 hours of me using this there is no drop in performance and the battery indicator light is still green – which means it is still above half charge. The Innokin Endura T20S vape kit is a simple, user-friendly vape kit that's perfect for vapers of all experience levels.

A tip I found with my friends T18 tank, is to always make sure the drip tip is fully pushed into the top cap. The bottom of the drip tip makes a seal with the centre of the coil. If the tip isn’t fully pushed in this can cause liquid to enter the centre of the coil which can result in spitting and leaks from the bottom pin of the tank.

How can I avoid damaging a battery whilst charging it?

Previous Endura tanks have been praised for their great flavour production – I know people who use the T18 regularly. Featuring a 1500mAh built-in battery and an 18W maximum output, the Endura T20S offers a consistent vape and battery life to support a whole day of vaping on a full charge.

The coil simply pushes into the tank – make sure to align the cut outs and push the coil firmly into place. An old coil is removed by simply pulling it out from the tank.

Likes

Vape tanks are tasked with holding your vaping liquid and the element called a coil that heats the liquid up to produce vapour. Many tanks have something called a 510 connector, this is the little piece of threading on the peg at the bottom of the tank. It serves to screw your tank onto your battery and is how charge flows from one to the other. The beauty of this is that many brands have the same 510 connector feature so you can swap out different parts of your vape kit - combining a SMOK tank with a Vaporesso mod for example. The tank top cap is difficult to grip and unscrew as there is little to grip onto. You have to remove this every time you want to refill so it does get a bit annoying. I found myself having to use my sleeves over my hands to unscrew this. Final Review Verdict I used an 80% VG 6mg nicotine E- liquid (I have added additional nicotine to make this 12mg nicotine strength.) As the 0.8Ohm is a sub ohm coil these generally need lower nicotine levels and can handle higher VG liquid. But these particular coils require less wattage running to them to perform so a 6mg/12mg nic strength isn’t too harsh. If you're after a simple device that delivers discreet vapour production, improved flavour and a compact design then you should consider the Innokin Endura T20S kit. I used the bulgy type drip tip the most – a straight one is also supplied. I didn’t think I would like the bulgy one but I love it! The Battery: