Reliability/Durability: I've been on them for a few months and they still look near new. The left grip gets a bit loose after 4 or 5 rides when I torque it to spec so I over torqued it slightly and it's been solid since. The dual tread design is reminiscent of the DMR Deathgrip and works similarly well. The raised hard-ish end of the grip is a bit uncomfortable for riders who hang off the ends of their handlebars, however. This type of grip has a collar that can be tightened around the handlebar, usually with a small bolt. This means you can fit them easily, take them off again to access other handlebar hardware and they won’t come loose, no matter hard to twist or how bad the conditions get. There’s very little cushioning and we’ve noticed a lot more harshness on rough trails compared to the Burgtec Bartender grip that was on my bike previously. After using my initial pair in the super wet Pisgah 111k last year I have added these to my other bikes as well. They are all-day comfortable and still provide grip to torque the handlebar. The inner mushroom section does a great job of floating the section of grip you pinch with your thumb and the firmer lateral half of the grip doesn't wallow or squish under pressure. Grip in the wet both with without gloves remains excellent. I have added these to my lightweight single speed as well, where the combination of grip and comfort is welcome. With the soft compound they do wear faster than some of the other options out there, but the price is very reasonable.

Many of these grips have closed ends, which is important to note if you like to store things in your handlebar.

DEATHGRIP INSTALLATION VIDEO

Finance is subject to application, financial circumstances and borrowing history. Performance Cycling Limited FRN: 720557 trading as Tredz are authorised and regulated by the Financial Conduct Authority. We are a credit broker not a lender – credit is subject to status and affordability and is provided by Mitsubishi HC Capital UK PLC. Terms & Conditions Apply. Brendan Fairclough – “My goal for DEATHGRIP is for people to watch the movie and only be able to watch the first 10 minutes before they have to turn it off, jump on their bike and go rip a turn.”

The grip has a slight ergonomic shape reminiscent of the Ergon GE1, but I’ve fitted it both ways and not noticed any difference. Unlike the company’s Half Nelson and Love Handle grips, the Getta Grip also has a closed end, so you’re not going to plug bar with dirt in a crash, and it also conforms to most race rules. The Reflex grip is made in two sizes: the regular model with a 33.5mm diameter, which I’ve tested here and a larger 34.5mm XL version. There’s a range of colour choices, but no super-soft compound option or flanged model. On the Trail/Feel: The grip is outstanding in the wet and dry, with or without gloves. My hands stay very comfortable all day and I no longer experience hot spots under my middle and ring finger. I really appreciate the single clamp since I tend to run my hands at the very edge of the bar. In the parking lot the texture near the flange felt weird but 10 ft down the trail and I don't notice it. I don't notice the grips at all for that matter which I suppose is the mark of a good grip.The open end of the grip allows me to store this Stealth Tubeless Puncture Plug tool from Muc-Off and a few zip ties in the bar end. Tested by Gerow. Fabric Magic MTB Grips Over two years in the making DEATHGRIP can now be experienced through the world’s leading movie and TV streaming service, Netflix. Get the full skinny below on how Brendan Fairclough’s and Clay Porter’s epic Deathgrip movie was planned and executed. It really is an impressive piece of work.

Some tapered grips are more complex than others. Ergon’s tapered grips are different to most in that they effectively alter the sweep of your handlebars. It’s a bit hard to explain/understand but basically the tapering is not concentric to the handlebar. The grip is fatter at the outer edge of your palm. Therefore it is possible to alter the plane in which your hands are positioned whilst riding.

RETRO DMR

Since I always opt for the Race Edition, I cannot speak to the longevity of the standard option, but I can squeeze a season of riding out of the race versions. If I am riding allot of bike park, they wear out faster, but the price vs use balance is great in my opinion. I generally am going through two pair a year sometimes.