Trying it out on smaller scale objects. Like the tinest Unicorn spit table :) so cute! I love miniature things! Try this unicorn spit project. Clothes dryer: Put fabric with dried Unicorn SPiT design in dryer for 1 hour on hottest setting. Remove and allow to cool to room temperature. Let set for 24 hours before washing.

Once dry, use Famowood Glaze Coat or other non-water-based coatings to protect, add gloss and dimension. For outdoor projects, make sure to protect your masterpiece with oil-based finishes or coatings that indicate they are adequate for outdoor use. Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colors. You could also try giving it a cheeky dirt pour and see what effects you can create on your woodturning. To use the dirty pour technique just add Floetrol Measure and Mix Famowood Glaze Coat High Gloss Finish or Famowood Glaze Coat High Gloss CRAFT Resin as directed. E6000 Fabri-Fuse: Mix 1 part Unicorn SPiT with 3-7 parts E6000 Fabri-Fuse. Dry flat for 5 hours. Washable after 72 hours. *This WILL change the texture, durability and feel of the fabric.

INSTRUCTIONS

Tip for Lighter color more wood grain: You can add water to it and dilute it up to 10 % officially I have done more than 10% for different looks. One Bottle lasts a really long time. Want an even easier way with a high end look? If you’re working with bare wood or a light-colored surface, you may want to apply a base coat of paint before proceeding with the gel stain. This will help ensure coverage and prevent the final color from being too light. Also, this is very important if you work with a light-colored Unicorn Spit Gel Stain. Step 4: Pour Out Some Stain Michelle found that people of all ages benefitted from playing with the yet unnamed product. From Michelle’s oldest son John, who has ADHD, to her friend's son Joe, with autism, men and women with dementia and alzheimers to an 80+ year old man whose hands didn’t work - everyone’s light came on. What a happy little miracle! Michelle’s heart and passion to see that look on peoples face became front and center. No matter what you’re staining, starting with a clean, dry, and smooth surface is important. Then, when working with wood, sand down rough spots and wipe away any dust before proceeding, this is very important if you want your stain to look its best. Otherwise, the finish will be uneven. Step 2: Choose Your Stain Color

Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Our Signature Gel Stain™ is a water based, non toxic, safe for indoors use, vibrantly colored wood stain & glaze in one! Unicorn Spit is a gel stain on wood, glass, metal, and other surfaces. It is available in various colors, including some glittery and metallic shades. Unicorn Spit is easy to use and can create unique and vibrant results. Continue to add or blend multiple colors to the surface in separate areas creating designs to achieve the desired look.

After you’ve applied the gel stain, let it dry for at least an hour before proceeding. If you’re working on a larger project, you may need to let it dry overnight. On the other hand, if you’re in a hurry, you can speed up the drying process by using a hair dryer set on low. Just be sure not to get too close, or you may damage the finish. Step 7: Apply a Second Coat (Optional) Yes. Make sure to protect your masterpiece first with finishes/coatings that are oil-based and indicate they are adequate for outdoor use. Yes, fabric will retain much of the Unicorn SPiT color if treated before washing (see various methods below)*. For best results, wash in cold water by hand (with very little laundry detergent). Rinse with cold water. Various methods to increase the colorfastness of the Unicorn SPiT before washing are as follows: Start by pouring a small amount of gel stain onto your work surface. You can always add more if needed, but it’s best to start with less and build up to the desired opacity. This step is also essential to avoid messing unless people want gel stains on their work surfaces. Step 5: Apply the Stain When you first get Unicorn Spit take a few moments to practice. Shake, first then Open those bottles and get too it. Don't wait and be afraid have fun and play with it! You will be upset you waited so long.

Next, sand the surface of the wood. You don’t need to remove all the paint or finish, but you should rough up the surface so the gel stain can adhere. Yes, fabric will retain much of the Unicorn SPiT colour if treated before washing (see various methods below)*. For best results, wash in cold water by hand (with very little laundry detergent). Rinse with cold water. Various methods to increase the colourfastness of the Unicorn SPiT before washing are as follows:Unicorn spit might sound like a mythical creature’s beverage of choice, but it’s a type of gel stain perfect for adding beautiful color to wood surfaces. This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. Once the surface has been adequately sanded, use a rag to wipe away any dust or debris. Next, apply a thin layer of Unicorn Spit directly to the wood using either a brush or a roller. Allow the glaze to dry for at least three hours before adding additional coats as desired. Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.

Great range of colours with some fun names. I’m not sure the names will catch on in the woodturning world, but hey the paints great to work with.After you’ve applied the sealer, let your project cure for 24 hours before using it or putting it on display. This will give the sealer time to set and dry thoroughly. Otherwise, you risk damaging the finish. TIP for Blending: Try to stop with too much blending it will smear the colors together and can loose the look. I had multiple foam brushes on hand to switch too if the spit gets too muddy looking. Can use your fingers too --washes off with shampoo. Undoubtedly, Unicorn Spit is for artistic minded creators and professional creators - people who can take an ordinary item, like an old piece of furniture, and transform it into a palette. With Unicorn Spit, you'll be able to transform everyday items into decorative pieces for your home. In fact, you could transform entire rooms throughout your interior with different combinations of colors, along with the usage of epoxies that you may also obtain right here at MichelleNicoles.com. NOTE: If a more washed-out look is desired: Let set for 24 hours before washing. Machine wash in gentle cycle with cold water. Machine dry if desired.