If possible, avoid the use of repeaters and mesh access points to maintain ideal throughput. The mesh can help with poor signal areas and struggling access points, but a gateway access point will always provide a better experience. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. Each repeater in a wireless network will see its throughput reduced by 50%. A mesh network allowsrepeater access points tochain off of one another, and it is possible to see connections with multiple repeaters in them. Each repeater in the path to the internet will take the maximum throughput and divide it by half. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Meraki Go Accessories No image available This guide houses articles regarding modules and accessories which work with Meraki Go devices. Troubleshooting A collection of articles to help troubleshoot common problems on Meraki Go hardware. Network problems come in varying forms and degrees of difficulty. This guide acts as a collection of all Meraki Go troubleshooting articles. See the table below for a listing of all troubleshooting documents.

Meraki Go is a cloud-based networking solution that lets small businesses self-manage their internet and WiFi. Cisco Meraki is committed to simplifying powerful technology to free passionate people to focus on their mission, and with Meraki Go, they're doing just that. Meraki Go empowers users who want an intuitive way to manage both WiFi and the ethernet networks at their businesses or small offices Seamlessly go between managing your network from your computer to the mobile app based on your preference Features No image available This guide contains a list of features supported by the Meraki Go platform and how to configure, manage, and troubleshoot them. Meraki Go Onboarding No image available If you have not yet added hardware to your account and configured it, you will need to go through onboarding.

If the device is going to be operated in the 5.15 - 5.25 frequency range, then it is restricted to indoor environment only. This device meets all other requirements specified in Part 15E, Section 15.407 of the FCC Rules. On the L2TP PPP Options modal, select only the PAPauthentication method. Be sure the other authentication methods are de-selected. All other options can remain as the default. Select OKto continue. After locating a working gateway, the LED will turn green. If the LED continually blinks orange, it is unable to locate a gateway.Monitor and manage your account from anywhere, including setting usage limits and scheduling when your guest WiFi is available This equipment is for indoor use only and the PoE device is considered unlikely to connect to an Ethernet network with outside plant routing, including campus environments. Any changes or modifications no expressly approved by Meraki could void the user’s authority to operate this equipment. This Transmitter must not be co-located or operation in conjunction with any other antenna or transmitter.