Barrel hinges are sold in metric sizes only, so you have to use a metric drill bit to drill the holes. Case hinges are similar to butterfly hinges but are commonly used in suitcases, briefcases and so forth. Hinges used for furniture and doors usually have good aesthetics imparted on them. This may mean decorative designs of hinges as what can be seen on butterfly and strap hinges. Also, aesthetics may also require hinges to be concealed so that the furniture will have a continuous, uninterrupted look. When you close the door, the leaves and screws are usually not visible, while the barrels holding the pin may be visible from one side. Properly installed, the butt hinge allows the door to be opened smoothly and swing through at least 90°. Residential and commercial hinges

The vast selection can be quite overwhelming at first. But, by using the concepts and explanations above, you should be able to make the right choice for your particular application. A pivot hinge or parliament hinge is the ideal hinge to use when you need to allow your door to open fully. Jolting Volumeter, Test Screening Machine, Drum Hoop Mixer-Mini, Automatic Pigment Muller – LABORATORY TECHNOLOGY

' + $(this).text() + '

Additional features are special characteristics of a hinge to allow or perform a specific function; for example, springs and pneumatic dampers for spring-loaded hinges. Multiple features can be designed to a hinge which can include pins, grease fittings, bearings, bushings, screw covers, etc. Parliament hinges are offset hinges that are designed to allow the door to lie flat against the wall when open. As described above, many different hinges are specifically designed to solve problems related to doors and access. A hinge is a machine element that connects two bodies allowing angular movement about a fixed axis of rotation, all the while preventing translations and rotations on the remaining two axes. A hinge can be considered as a journal bearing with only one degree of freedom where a shaft is rotating in a hole. Hinges only allow one rotation, either yawing (the most common), pitching, or rolling. Latches are mechanical components that allow the temporary joining of parts that are moving relative to each other. They are actuated to release the coupling and allow the two parts to separate. Latches are mostly seen on doors and enclosure... Magnetic Door Latches

A continuous hinge is normally fitted to pieces of furniture or cabinets that require additional support. The two long leaves run the entire length of the door or window panel. A magnetic door latch is a type of latch that consists of a striking pad and a magnet and is used to keep doors and gates closed. Magnetic door latches are also known as magnetic door stops, magnetic door catches, and door magnets... Rubber Latches The doors where pivot hinges are attached open and close in an unconventional way. These hinges are placed at the bottom and the top of the door and facing it in an outward direction making its axis of rotation on the outside.

Door and Hinge Classification

Hinges typically used by cabinet makers or carpenters are smaller. This is because the door on a piece of furniture, a cabinet, and cupboards do not carry a huge load. Another factor to consider is the method of fastening the hinge to the moving and fixed parts. Hinges can be welded, bolted, or screwed on the frame which typically depend on the type of service or amount of load to be carried. Moreover, hinges can be installed with different mountings such as surface, concealed, flushed, overlayed, and so on.