Not every component in every controller will require this screwdriver, so check the appropriate repair guide for your controller. Cookies collect information about your preferences and your devices and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests. Use a T-8 safety Torx bit, and be careful to properly seat it and apply even pressure to avoid stripping the screw.

Consider working on a tray to prevent screws or other parts from falling on the floor or getting lost. And subscribe to our newsletter so you’ll be the first to know when the newest consumer tech hits the teardown table. Xbox controllers can also be identified by the Xbox logo button or printing on the front of the controller.Xbox One controllers are generally accepted as one of the best video game controllers around, but they still break down from time to time. Jez is known for breaking exclusive news and analysis as relates to the Microsoft ecosystem while being powered by caffeine. Even though the SSD itself is fairly standard, if past experience is any guide, you'd better plan on some serious headaches if you ever need to replace or upgrade it in the future.

The problem here is that when we eventually have to replace thermal paste, you HAVE to use thermal putty for RAM, SSD and MOSFETs, since thermal pads, even of you measure the space between, may be inadequate. Our tests indicate that both optical drive and SSD repairs will be problematic at best—which could be an issue if you want this thing to play games, or boot up. You'll need a T8-compatible screwdriver kit to get into your Xbox controller's security screws, and this more than does the job. Yes, both are pretty much the same, but thermal putty, from what I understand, is a lot more viscous than thermal paste.With access to the interior, clean and replace components and remove analog sticks, the d-pad ring and d-pad.

Before you can take apart your Xbox One controller, find a clean and clear workspace that's well lit. Note that there is also adhesive holding it in place under the plastic, so don't be afraid of applying some force. You now have access to the rumble motors, triggers, and some additional screws that you can leave alone unless you need to replace specific components on the circuit board.In September 2021 through the Xbox Insider program, Microsoft started rolling out the improved Bluetooth and latency features from these newer controllers to its official Xbox One controllers, including the Xbox Adaptive Controller. I disassembled my controller because, when dropping it, I somehow managed to get the joystick lodged into an awkward position on the inside. Reddit and its partners use cookies and similar technologies to provide you with a better experience.