Outputs:8 x 100mA outputs, 4 high-current 300mA outputs, 2 switchable 9-volt/12-volt outputs, 1 switchable 9-volt/18-volt output Just like its bigger brothers in the 1 SPOT Pro line, the CS6 has a variety of DC voltages available to power just about any pedal on the market. Each output is completely isolated, regulated and filtered, eliminating crosstalk and noise. With no big transformer to hinder their performance, proximity noise is not an issue with any 1 SPOT Pro.

The 1 SPOT is the original 9V pedalboard power supply that only takes up one spot on an outlet strip or wall outlet. It solves an annoying problem that people have complained about for years, and does so with quiet, reliable performance!In keeping with the tradition of the 1 Spot, Truetone have opted to use the same Switching Power Supply technology for the 1 Spot Pro range.

We recognize that not all guitar pedals run off 9V. That’s why all 1 SPOT Pro models have outputs that can put out 9Vdc, 12Vdc or 18Vdc. The CS12 even has a variable voltage output for old-style fuzz pedals, and a 9Vac output for certain Line6 and Digitech pedals. And if you need to change the voltage of an output, Truetone also makes inexpensive converter cables to help you. There’s the Voltage Doubler, which does exactly what its name says, and the 18V to 9V Converter... which also does what its name says. They don’t have the most clever names, but they get the job done! The low-profile design of the 1 SPOT Pro CS6 allows it to be mounted under flat pedalboards like the Pedaltrain® Nano and Metro series. However, the compact design is also perfect for mounting on top of pedalboards, serving the dual role of a power supply and pedal riser. Please note this used to be known as the Visual Sound 1 Spot- the company has now changed its name to Truetone!) True to the spirit of the original 1 Spot power supplies, the new 1 Spot Pro range uses exactly the same switching power supply technology. x CYR – (5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity) Red – reverse polarity converter

Truetone 1 Spot 9V Guitar Pedal Power Supply, UK Overview

The 1 SPOT makes compatibility, polarity, plug size, voltage, etc. easy by providing a guaranteed list of adapters it can replace: Boss PSA, Boss ACA, DOD PS-200R, Morley 9V, Danelectro DA-1, Dunlop ECB-03, Ibanez AC109, and Zoom AD-0006. If your pedal takes one of these adapters (90% of the time), the 1 SPOT is for you. x CL6 (5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity) Green for Line 6 DL4/M9/etc. and some Eventide pedals. The Truetone 1 Spot Pro CS7 Power Supply compes complete with everything you need to simply plug-and-play.

You can even use the 1 SPOT anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either... the 1 SPOT is one of the quietest power sources you can buy. With optional converter plugs, the 1 SPOT will work with virtually ANY 9V pedal! …even Line 6 modeling pedals! ** The 1 SPOT Pro CS6 includes a generous assortment of cables and converter plugs. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end. You need to assess your pedals’ power requirements: do they all need 9V, or are some running at 12, 15 or 18V? It's worth noting that some overdrive pedals offer the ability to run at higher voltages for increased headroom, too. Line 6 M9 may be powered by outputs 10-11, but will also require the CL6 converter. The M9 can also be powered directly by the 9Vac of output 12.Digitech Whammy: Versions 1-4 may be powered by output 12 (9Vac) Version 5 or Whammy DT may be powered by outputs 10 or 11. Just like with the original 1 SPOT, (and your laptop power supply and phone charger), the 1 SPOT Pro uses switching power supply technology which allows you to use it anywhere in the world. The 1 SPOT Pro won’t leave you stranded at your first international gig!

Battery Clip Converters, (2) 3.5mm (1/8”) Converters and an L6 Converter for Line 6 modeling pedals Line 6 modeling pedals (DL-4/MM-4) may be powered by outputs 8-11, but will also require the CL6 converter. You may optionally use output 12, as the power input of these pedals can use 9Vac or 9Vdc. The Truetone 1 SPOT is a 9V PSU that only takes up 1 Spot on an outlet strip or wall outlet.The Truetone 1 SPOT solves an annoying problem that people have complained about for years. Only takes up ONE position on your outlet strip or wall outlet. Handles from one to over twenty guitar pedals (1700mA max!) New heavy duty output cable. The Truetone 1 Spot Pro CS6 Power Supply compes complete with everything you need to simplyplug-and-play. Then there are mA requirements: while some fuzz and overdrive pedals might only draw 10mA, contemporary digital and multi-effects can draw anywhere from 100-1,000mA. In these instances, you’ll need to look at power supplies that are able to output higher mA from each output. Do guitar pedals use AC or DC power?Line 6 POD or M13 cannot be powered by the 1 SPOT Pro CS12, even on the 9Vac output. The milliamp draw is too large for those units.