If the Dash Cam does not appear as a drive on your PC, please press the reset button on the underside of your dash cam and try all the USB ports on your computer. Then the Dash Cam will be visible as a removable drive on your computer. If you go into My Computer (Windows) or Finder (Mac) you will be able to see the Dash Cam listed as a drive, usually called NEXTBASE. Installing the camera is simple enough thanks to the sturdy suction mount, which shouldn’t come loose even in the event of a minor accident. Once the camera is in place it needs to be adjusted so the wide angle lens points forward and the zoom lens points rearward – these are clearly marked to make life easier. If you want a basic dash camera then there are simpler, cheaper alternatives like excellent Nextbase 402G, but if you need record what is happening both in front and behind of your car then the Duo is ideal. It’s far more user-friendly and much less fiddly than setting up two separate cameras.

DUO HD Support - Nextbase - Europe DUO HD Support - Nextbase - Europe

Plug your Dash Cam in. Ensure the cable is plugged directly into the Dash Cam and NOT via the mount. Video quality is good enough through both lenses, but the Duo does need more careful setting up than a single lens camera. Typically when setting up a dash camera it needs to be angled slightly downward, which makes the built in sensor collect the correct amount of light from the road ahead, rather than bright sky. Setting the camera too high results in an over dark video. On the dash cam's screen you'll see a menu of 3 options. Please select 'Mass Storage' on the Dash Cam screen and then OK so that only that displays on the screen.

How to use the Nextbase DUO HD

This footage can then be plugged into some desktop computer software, compatible with both Mac and Windows, which shows GPS location plotted on a map, G-forces, speeds and other useful information. That’s very handy in the event of an accident, since you can give the insurers some hard data to prove who was at fault. What’s it like? On the Dash Cam's screen you'll see a menu of 3 options. Please select 'Mass Storage' on the Dash Cam screen and then OK so that only that displays on the screen. Plug your Dash Cam in. Ensure the cable is plugged directly into the dash cam and NOT via the mount.

Nextbase Parts Products – Nextbase Parts

If the Dash Cam does not appear as a drive on your PC, please press the reset button on the underside of your Dash Cam and try all the USB ports on your computer.

Latest Deals