And behind the motherboard is where NZXT's years of experience truly shine. The cable management with this case (and other NZXT H7 series cases) is in a league of its own. It's exceptionally good and makes it possible for even novices building their first computers to put together a tidy rig. While NZXT’s H710 chassis has proved to be popular over its lifespan, the PC market has changed a lot since this case was introduced. For starters, CPUs and GPUs are more power-hungry than before, making airflow a greater concern for PC builders. This change to the PC market has forced NZXT to include more fan mounts on the top of their H7 series cases, adding support for top-mounted 360mm liquid cooling radiators while redesigning their front panels to enable increased system airflow. We’ll keep this section very brief since we’ve already reviewed most aspects of this case, but it’s worth mentioning a couple points again. First, the top and front panels are an enormous pain to remove. They’re held on with stiff clips, and the best method for defeating them is to yank the front panel violently from the bottom edge and then yank the top panel violently from the front edge. This MUST be done to remove the front filter, replace fans, or take out the radiator/fan tray at the top of the case, and it runs the risk of snapping the spindly 4.5cm clips or curving the panels and creating a gap between the front and top panels. The fan tray is still very nice, by the way--it’s held in with thumbscrews and can be flipped upside-down to move it higher away from the motherboard, and we’d like to see a similar tray at the front of the case. GPU dT was 52.4C dT in this test, similarly competitive but also outperformed by the O11 XL, which had fans positioned directly under the GPU in our configuration. The quantity of fans means that no matter how slowly they spin, they’re still pushing a uniform wall of air through the body of the case and effectively cooling the components within. Conclusion

If you are looking for a recommendation, the NZXT PCIe Riser Cable is an excellent choice that not only meets these requirements, but also provides PCIe 4.0 compatibility. Can the Aer Trim be installed on the included fans? Let’s talk about the worrying part of all of this: is it possible to upgrade from a H700 to a H710 WITHOUT DATA LOSS? This handy chart pulls the primary specifications of each of our H-series cases into one location! This should make cross-referencing and making a decision between them much easier. This PSU-mounting solution may sound more complicated than simply inserting the PSU through the side of the case, but I actually find this system can work better in practice. It may require more screwing and unscrewing, but it’s easier than trying to align the PSU in place from the side while you fasten it into place with the other hand. It also helps you route your power cabling more efficiently as you slide in the box gradually from the rear panel.Remember, the plan is to get the H710 installed and running under ESXi 6.7 first and then upgrade to ESXi 7.0 later, once the H710 has settled in. When it comes to solid front and roof panels, the big concern for any user is access to air. As soon as you put anything in the way, you’re immediately reducing how much air those front fans can draw in. It’s a problem that both NZXT and others (such as Phanteks with its Evolv series) has predominantly faced in the past and you can tell that these companies have taken steps to reduce this problem, without compromising on the overall style of the case.

Anyway, I’ll let this settle in a little further after which it’s ESXi 7.0 time. Don’t worry, rest assured, I’ll post here when I complete the upgrade. The NZXT H710 and H710i share almost the same features. They both measure 230 mm x 516 mm x 494 mm. Both of them are made of SGCC steel and tempered glass and weigh around 12.1kg.

Clean looks meet innovative design.

Building a PC can be a difficult task. Every small detail, from the processors to the RAM, must be scrutinized. The computer case is one area that many people overlook, and however, it is one of the most important decisions you will make when building your PC. If you’re familiar with the H700i, you’ll notice that the H710i doesn’t do a whole lot different here compared to that first iteration. However that’s not a bad thing, as the H710i’s internal layout is nothing short of impressive. No expense has been spared when it comes to ensuring your build experience is as seamless and pleasant as possible. Otherwise, the H710i features a lot of the same features as the NZXT H700i. Plenty of intuitive cable cutouts and passthroughs, a roomy interior, quality finishes on all of the folded steel, and a lot of versatility as to where you can run your cables. Rear Cable Management and HDDs As a result, understanding the complex custom cooling systems that can be installed inside will assist you in determining which device provides optimal airflow and cooling.

Since 1982, PCMag has tested and rated thousands of products to help you make better buying decisions. See how we test. The H710 and H710i PC cases share the same measurement having 230 mm (9.06 in) width x 516 mm (20.31 in) height x 494 mm (19.45 in) depth with its feet. They are both made of SGCC steel and tempered glass and weigh around 12.1kg. GPU torture averaged 50.4C dT, down to 46.5C dT with the front panel removed. Like the CPU test, this isn’t a huge jump and it means we can’t criticize NZXT’s front panel design too heavily, although it could be improved. All three front intake slots are filled, there’s a big air intake cutout under the bottom edge of the front panel, the PSU shroud has a decent section removed at the front, and there are plenty of perforations on the top of the shroud. We taped over the shroud as part of our old H700i review and didn’t see any real change in performance, but it certainly doesn’t hurt, and now that the HDD cage is shorter it’s possible for the bottom intake fan to move some air over it and through the shroud. The H710 mini is designed to fit into a later 12th generation (PowerEdge Rx20) servers as can be seen from it’s proprietary connector:At time of writing this post, it has been just over four and a half months since my original missing PERC post and unfortunately - although not really unexpectedly - there has been no release of an ESXi 7.0 compatible native driver for the H700 or LSI 2108 based array controllers in general. To summarize this review, both the NZXT H710 and H710i offer luxury with simplicity and durability. They are arguably classy, stylish, and premium, with the high build quality. The H710 and H710i are both excellent cases, and each of them has outstanding characteristics that contribute to its effectiveness. The factors to consider before deciding between the two are summarized below.

At the top of the case is room for up to three 120mm case fans or a 360mm water-cooling radiator, but accessing these mounting spots will take some work. To get to them, you first need to remove the front panel by pressing plastic clips that are located all around the panel, then pulling upward. After that, you do the same thing to the top panel, but this is made more difficult by the presence of LED strips and the cable bar. It’s certainly doable, but from the get-go, based on my experience, if you plan to add extra case fans or a liquid-cooler radiator up top, be ready for a bit more work than usual. This is the price you pay for such a featureless (and free-of-fasteners) front and top panel. One of the most important factors to consider when building a PC is PC cooling. Although many PC builders are aware of this, understanding why cooling is an important component of a build, as well as applying these principles to new builds, can be beneficial. The H710 series of cases only supports EATX motherboards up to 10.7 inches in width. You may be able to install wider motherboards by removing the included cable bar, however this may negatively affect the aesthetics of the case and remove some cable management options such as tie-downs that are part of the cable bar. What length PCIe Riser Cable should I use to vertical mount a GPU in the H710i? The NZXT H710 and H710i are virtually identical. The only real difference is that the H710i has integrated RGB lighting and a smart controller for fans and leds compared to the H710.

This is the best NZXT H7 PC case and the one to buy for your next PC build.

The GPU average dT places the H710 between the H500M Mesh and the 570X on the chart. It’s not a bad score, and it’s again a couple degrees cooler than the H700i’s initial result of 52.5C dT. NZXT’s choice to ship with four fans is a valid way of making up the gap between it and cases with better airflow potential. Blender - CPU & GPU Isolated Renders