He owns a 25-acre farm in Aberdeenshire with a focus on self-sufficiency, living off the land, and working with nature.

Skadi The Kindling Splitter

Sarah’s role as chief editor at DIY Garden is about more than just making sure we’re literally dotting the i’s and crossing the t’s (although she’s a stickler for detail, so it’s certainly about that too! Not only was this one of the quietest wood splitters that I tested, but the noise that it did make was surprisingly pleasant. This new sleeping bag concept which preserves the functionality of a traditional sleeping bag, but gives maximum mobility by allowing arms and legs to move freely with the sleeping bag, not in it. If you’re choosing an axe, a length of between 30 and 45 centimetres should give you sufficient leverage and good balance without being too heavy. A. The common type of kindling splitter where you force the log down onto a blade needs little or no sharpening.

It’s quite safe because you’re splitting away from you, but it does rely on arm strength to split the kindling, which might be a challenge for some. I used the Faithfull FAIFG4 4lb Club Hammer with this wood splitter, and found it to be the perfect weight and size. However, you could also use a mallet, or even a heavy piece of wood – so long as you have some weight in your hands, just about anything would work.

Wall Mounted Wood Splitter Kindling Splitter | Wayfair.co.uk Wall Mounted Wood Splitter Kindling Splitter | Wayfair.co.uk

Then, hit it with a bit more strength a few times to push it down the wedge, and, as it moves down, it will split into smaller pieces of kindling. The blade isn’t as sharp as the blades on some of the other wood splitters that I tested, but, according to the company, this is an intended feature – due to how the wood splitter is designed, a sharp and potentially dangerous blade isn’t needed. It’s still an efficient tool for the job, but as the kindling gets smaller, you almost always have to hold the piece you’re splitting.The clever hand-tool is used to make kindling easily and safely, simply attach it to a wall beside a wood stove, fireplace or in a wood shed, place the log into one of the bracket notches, and lower the steel cutting wedge to produce a nearly effortless kindling supply. You’d think that kindling is a pretty simple product, yet there are a surprising number of ways to make it, including an axe, pole splitter, hinged splitter, and kindling splitter. You do need to hit the top of the log with a hammer or mallet, so just make sure to keep your fingers out of the way. Back in the 1930s and ´40s, during the height of the Great Depression, artists designed posters for the Works Projects Administration to encourage travel to national parks and other tourist sites in the United States.

Wall-Mounted Kindling Splitter - BlessThisStuff Wall-Mounted Kindling Splitter - BlessThisStuff

A kindling splitter might be a very simple tool, but there are one or two precautions you should take to avoid unnecessary accidents or injuries. The device is fixed to a convenient vertical surface, such as a wall or post, you rest the log against the backplate, and push the blade down and through. It takes a couple of minutes to set up, but once fixed, you simply slide the blade up and down the pole.You can clean it with a stiff brush and warm soapy water and remove stubborn deposits with mineral spirits. Instead of taking the cutting edge to the log, a kindling splitter hammers the log down onto a blade. It features a round cast iron frame with a cast iron wedge in the middle – this is where the blade is. When using Skadi its electrostatic paint may be chipped or scratched which does not affect the performance of the tool. Holes: For added stability in use, it’s nice if the base has pre-drilled holes to allow the kindling splitter to be bolted down.