If you’re looking for an affordable garden hose splitter that is easy to use, the 2wayz garden hose splitter is a great choice. Depending on your intended use, there are many garden hose splitters available on the market to fulfill certain tasks efficiently.

While plastic splitters are light and durable, they do not provide the same longevity as metal splitters and can deform when exposed to hot water or high temperatures. The handles on this dual splitter are easy to grip, and the unit installs easily without requiring tools. On other hand, if you’re going solely for high water pressure needs, the Melnor 65029-AMZ EZ-Flow Control Valve is unbeatable here.Most fittings have a standard external size of 1 1/16 inches wide, but the inner diameter may vary depending on the circumference and thickness of the hose. Installation and use of a garden hose splitter are pretty straightforward, but there are a few tips to keep in mind. However, the handles on this garden hose splitter are small and tight, which can make it difficult to turn the hose on and off. Plastic garden hose splitters, on the other hand, are much more lightweight and affordable than metal ones.

The rubber provides you with convenient gripping while controlling the water flows of individual outlets. The volume of water that the hose can hold is also pretty low, which can be a problem if you intend to use it for cleaning.Each connection also includes a dedicated handle that you can use to switch the water supply on or off if so desired. The threads on this are also not very durable and can corrode easily if used in a colder environment or with high water pressure. Sealed: Comes with a rubber seal to prevent leaking and a 3/4 inch BSP thread suitable for 95% taps and an adaptor for older 1/2 inch BSP taps. You can even install multiple garden hose splitters together to allow the maximum spread of water- a DIY irrigation system in your very own garden that is effective to boot.

Operators can adjust brass levers to regulate the stream coming out of the hose, giving appropriate pressure levels for any task ranging from watering the flowers to washing the car. Garden hose splitters solve that problem by directing water from a single spigot into two or more water channels.Thus, if you ever face any regret with this splitter you’ll get all the money back regardless of purchase time. Compatible connectors or couplers will extend the reach of the hoses, though excessively long hoses may result in reduced water pressure.

The material of the handles is also important, as plastic ones are easier to move than those made of metal, but have the risk of breaking off if applied too much pressure. There may be some areas that you are unable to utilize because of their unfavorable proximity to the water supply you have. This smart choice of the company allows the splitter to fight against the wear and tear of the external environment.

Dual tap connectors, threaded taps, repair connectors, two way tap adaptors… Browse our range of hose pipe connectors today to find everything you need! Most fittings have a standard size of 11/16 inches, which allows them to be secured to standard garden hoses. Tap hose connectors are simple to install but must match the thread size of the desired tap, which can be ascertained by measuring the internal diameter. Please remember it can take some time for your bank or credit card company to process and post the refund too. A: The way to check if a hose connector is male or female is to simply look at the end point of connection.