What configurations for guttering and downpipes are there? Step 1: Fitting the fascia board so it’s level B. Measure and cut box end from a deep board. Front edge should tilt up to match height of fascia board. Unfortunately, not many people are familiar with these terms, so we thought you might appreciate a few words of explanation. Next, measure the required length of your box end and cut it from a deep fascia board. The front edge of this piece should tilt up, so it matches the height of the fascia board that is already fitted. Step 3: Cutting a length to the gable wall

Our fascia profiles come wrapped in polythene sleeves with a particular shade of white. We recommend that the protective tape is removed just before installation to avoid damage to the product. The fascia board is the long, straight board that runs along the lower edge of the roof. The fascia is fixed directly to the lower ends of the roof trusses and usually does all the work of supporting the lower edge of the bottom row of tiles. The fascia board also carries all the guttering. Cellular foam UPVC products are generally easy to handle and work with using standard hand tools for cutting and drilling. We recommend that when cutting any of our products a fine tooth saw blade is used in a safe manner. We do not recommend installing UPVC products in temperatures below 0° due to the product being prone to become brittle. As box end construction is a highly technical job, we supply and fit all the materials required for it. This includes high-quality uPVC fascias and soffits, uPVC and aluminium gutters.

My House doesn't have Fascia Boards - How do I fix the Gutters?

H. Underdress existing felt with dpc material or eaves protectors ( EP1500). New material must dress into the gutter.

We can only provide a delivery date and are not able to confirm the time delivery will be attempted. Therefore, we ask that somebody is able to accept and sign for your items throughout the started delivery date. Manufacturer guarantees are based on technical testing information obtained from BSI and are valid on the basis that manufacturers recommendations for installation are followed. Box ends have to account for the various angles on an individual roof’s gable end, meaning they need to be precisely installed. For anyone involved in box end construction, we’ve created a step-by-step guide that details the process. The first step when building a box end is to install the fascia board so it’s level with the face of the rafter situated at the gable end. When doing this, make sure that the soffit is cut either square or mitred and it has an overhang of 10mm. Step 2: Creating the box end You're able to select a preferreddelivery date in your shopping basket. Whilst we aim to deliver your items on this date, it is not guaranteed.

So where does a Barge Board fit in?

Use conventional carpentry tools including fine toothed saws. Power tools may be run at speeds appropriate for timber. Nail and screw holes do not require pre-drilling. Off-Cuts