When RUT955 is configured as mesh gateway it provides internet access to other mesh nodes. When configured as mesh node it acts as a mesh router which forwards traffic to and from mesh gateway. Nodes also connect other wireless devices to the network such as laptops and cellphones. Arrange power and Ethernet cables so that they are not likely to be stepped on or have items placed on them.

Old firmware versions will not support new flash memory, meaning that only RUT9XX_R_00.06.02 and newer firmwares will work with updated hardware. Added NMEA forwarding, Geofencing, NTP calculation, AVL forwarding, HTTPS forwarding, other satellite support to GPS functionality This device must accept any interference, including interference that may cause undesired operation of the device.

MikroTik GPS Antenna with SMA Connector

TELTONIKA NETWORKS vakuuttaa täten että RUT955 tyyppinen laite on direktiivin 2014/53/EU oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments. The General Setup section is used to turn a wireless device on or off, select the operating frequency (WiFi mode and channel), transmit power and define a country code. The unit must be powered off where blasting is in progress and explosive atmospheres are present or near medical life support equipment. Device install procedures or any automated solutions might need modifications. Please note: this product change notification does not affect any previous RUT955 devices.

Subject information is not mandatory but can be used as user-friendly way to identify the ownership of certificate files by including such information as the owner's location and company name. To improve manufacturing speed, efficiency, and reliability. In addition, increasing quality, precision, durability of marking and reducing environmental impact.FW version RUT9_R_00.07.00 and above will not be supported on legacy-design (RUT955 *7V***) devices. Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance The Sign the certificate slider control whether the certificate will be signed automatically or manually after the generation is complete. All RUT955 devices manufactured starting from Q3 2022, will require firmware version RUT9_R_00.07.02 or newer for the RS232 and RS485 interfaces to function properly.

Fixed 'I/O status' message to include correct Input/Output name based on info in ubus ioman objects Note: Firmware version RUT9_R_00.07.01 released on 2021.11.18 was removed due to an issue with keep settings functionality.Prin prezenta, TELTONIKA NETWORKS declară că aparatul RUT955 este în conformitate cu cerinţele esenţiale şi cu alte prevederi pertinente ale Directivei 2014/53/EU The Certificate Generation tab provides the possibility to generate TLS certificates required for secure authentication and communication encryption used by some of the devices services. TELTONIKA NETWORKS déclare que cette RUT955 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU Fixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled Prolonged use in such space may cause excessive heat and raise ambient temperature, which will lead to the automatic shutdown of your device or the disconnection of the mobile network connection for your safety. To use your device again after such a shutdown, cool it in a well-ventilated place before turning it on.