You not only can set it on the software but also can set it on the radio keypad. Anytime, anywhere, very convenient. 5. All Channels The special feature of this device is the (almost) complete programmability on the device, without a code plug software. Both are very similar in themselves, like the repeater mode, only that we have to switch FM at FM with theExitbutton and if necessary still set CTCSS tones, or with DMR simplex or host spot operation to the DMR mode Select Simplex and if necessary deactivate the shift.

The Ailunce HD1 (GPS) is a dual band FM / DMR handheld radio with 10W / 5W / 1W power.The device can store up to 3000 channels. The function can be changed via the corresponding menu itemPromiscuous, in the BandA / BandB Set menu for each set channel or VFO. The only reason the OpenGD77 firmware vaguely works, is because of a leaked partial copy of the DMR chip data sheet, in Chinese, plus a huge amount of reverse engineering (which I estimate must have taken hundreds of hours of work by various people). Now we do the same thing in theRXListmenu, we also want to hear on the correct TG.Again, we now choose DL / TG262. No obscenities, discriminatory, abusive, or other content not suitable in public or for younger readers.Key– short press -> switch single or dual VFO, with single VFO the date and time are displayed instead of the second VFO.Switching between VFO A / B is also possible in single-VFO mode with the * key. HD1 supports all channels. We can set zones and put the channels in one zone. If we forgot or we don't need to put them in any zones. it will default to all channels. Turn on the radio, all channels can show on the radio. You can select one zone or All channels. All channel includes all channels we have set. 6. Switch zone With the arrow keys you can now switch between the individual points (ID / Type / Name / City / Province / Country), with theMenubutton you can change to the entry in blue and edit it.

Unfortunately, the sent data of the HD1 GPS does not seem to be fully network compliant yet, an evaluation / display at aprs.fi is currently not yet. Since the VFO remembers the settings you can also on VFO A e.g. TS1 TG262 and on VFO B TS2 TG9 preset, and adjust if necessary only frequency and shift. When you first turn on the unprogrammed radio you are greeted with the VFO as the radio is in frequency mode. Yes, the HD-1 has a VFO and is fully programmable from the front panel. While I wouldn’t necessarily want to program DMR channels into the radio this way, you do have the ability to be frequency agile and change to any VHF or UHF frequency on the fly. That’s a nice feature especially if someone tells you to go to a channel you don’t have programmed in.Import new user database:Now a current user database can be imported.This now quite consciously before the code plug, should write the user database, for whatever reason, in memory areas of the code plug, these are overwritten in the subsequent restore the code plug again. If you have any advice about the ailunce HD1, welcome to send message to us. We will do our best to achieve it, even the hardware don't support it, we can achieve it on the next model. A valid product review is one where you have experience or knowledge of the product that you would like to share with others. You can add to or update/edit your existing review's content including the Rating and Time Owned with the Edit button on the right side of the review text body. Edits will go thru the review Approval process.