MAX Strip Paint & Varnish Stripper handles the most challenging stripping jobs with a perfected wet work method for dust-free paint removal. Your property is one of the few things you can bank on in this world, and it hurts to see it deteriorating due to exposure to the elements. This varnish-stripping gel is a good lacquer remover for wood.It contains no harsh chemicals and is suitable for interior use. Use the stain remover for removing paint. Biochemical: This type of paint stripper is safer than caustic products. However, a respirator, chemical-resistant gloves, and skin-covering clothing should still be worn when handling these products. Our window casing and basement floor had previously been painted. We spray-painted the roofing material and let it cure for a week prior to stripping. Following the directions on the label of each product, we applied the strippers, let the product work for the minimum recommended amount of time, then tested with a scraper at intervals until the paint was ready to remove. Then we used a paint scraper, paint-stripper pads, and stiff bristle brushes to remove the paint as if we were preparing the surface for a fresh paint job. If any of the products required additional time or another application to complete the job, we did so. FAQs

Mask and protect all surrounding surfaces like painted, aluminium and powder-coated surfaces. If used close to gardens, hose down prior and after application. Do not be hasty when waiting for the stripper to work, some take longer than others. Read the label for clarity and be patient

Using Marine Strip on Wood

The biodegradable paint remover can be applied by brush, roller, or sprayer. It’s successful at stripping new and decades-old paint coats from stone, metal, and other painted surfaces, all with ease. Biochemical paint strippers are less harsh than both solvent and caustic strippers because they are made with a mixture of plant-based solvents and an organic compound known as N-methyl-2-pyrrolidone (NMP). These strippers do not work on epoxy or polyurethane, though they are suitable for both water- and oil-based paints on masonry, metal, and wood surfaces. Despite being gentler than solvents and caustic paint strippers, biochemical strippers are still powerful and can cause adverse effects to your respiratory and reproductive systems. Make sure to use appropriate safety equipment when working with any paint stripper. Paint strippers penetrate the wood grain better than scraping and sanding and these products have come a long way since methylene chloride. Look for water-soluble, low-VOC formulations that don’t emit unpleasant odors. At the same time, be sure the paint stripper is potent enough to dissolve paint. Paint is more stubborn than stain. Mechanical Methods

Follow the instructions, and it will be up and running in minutes. The best part is that it cleans up easily with water and white vinegar.

Restrictions

Finally, clean up the area with water, but if you add vinegar to it (about half and a half), it will improve the end result. 6- Washing Soda, Sodium Borate, And Ammonia

Start spraying or rolling the stripper along edges first and then fill up the entire remaining area, During application, make sure to keep the applied surface wet with a garden hose water mist or spray. Sodium borate is also referred to as borax, its most common name, and is usually utilized to clean different appliances around the house. The Citri-Strip paint remover is easy to use and is non-toxic as it doesn’t have any chemicals like NMP or methylene chloride in its formulation. It does have Benzyl Alcohol as its main ingredient. This remover proves you don’t need any harsh chemicals to remove paint from any of your surfaces. The fact that it stays actively wet for 24 hours makes it really different from its competitors. In the first method, you use an infra-red paint stripper. Plug it in and scrape the surface keeping the stripper six inches away from the surface. Next, scrape the surface using a scraper or putty knife. Deane Biermeier, a licensed contractor and carpenter, and a memberof The Spruce's Home Improvement Review BoardYou can use a roller, brush, or putty knife for application. Then you have to leave it for more than 30 minutes to let it penetrate deep. After that, you can scrape it off using a scraper. Note that applying this product is a labor-intensive job. Be prepared to spend hours or a whole weekend tending to your project actively. The whole process of application and scrapping takes arm grease. So, get ready with your protective gear. One thing that will ease your job a bit is its low odor. But it is tedious and mundane. You would love the company and a helping hand for this task. Specifications To spray it on the surfaces, you can use a garden sprayer and then brush it to spread the product evenly all around the surface. While you brush it, if the surface is dry, just spray it with a little water to make it wet. Woodrich being applied As it’s water-soluble, Marine Strip can simply be rinsed away with water using a pressure washer and it has an active working time of up to 12 hours meaning it doesn’t require constant supervision and immediate removal as some products do. It is VOC free and non-flammable, so Marine Strip is safe to use in poorly ventilated or confined areas. Marine Strip is not effective on 2 component, baked-on paints or polyurethane paint and varnish. Marine Strip is a must-have for all boat owners, a powerful but easy to use paint stripper for almost any surface on your boat. Ideal Uses for Marine Paint Stripper