We would recommend the silver underlay if you are installing the floor on the ground level. If you are looking for an underlay to use where the floor is uneven or if you are installing for use on an upper level we would recommend the gold underlay as it will help to reduce sound transference to the rooms below. I'm sure it would be fine and do a job but for clarity you need to understand that this product isn't a carpet underlay. So in short I would suggest there maybe better products, which are 100% suitable, available. For square or rectangular rooms, simply multiply the width by the height. For example, a room that is 5m x 2m will need 10m² of underlay. If you have doorways and recesses, cut the underlay into and around these spaces. It’s OK but not ideal, to add an extra piece if you need to but make sure it remains flat.

Insulates & protects laminate and hardwood floors, and work alongside underfloor heating solutions. Produced using CFC and HCFC closed cell polyethene foam with an integrated silver foil barrier featuring 200mm joint overlap approx, Warranty voids if you don’t use the barrier pro x tape, other than that decent underlays and fast delivery – thanks Colin B Could this product be laid directly onto the concrete floor and carpet underlay then carpet laid on top? Bear in mind that not all underlay types are suitable for wet areas such as kitchens and bathrooms while some types come with a built-in damp-proof membrane. It takes around 5 minutes to fill out the form and you should get an answer to your application instantly. However in some cases V12 Retail Finance, our finance provider, will need a little more time to look at the application in more detail.Underlays aren't designed to 'level' the floor - although they do smooth over the surface. If you're laying over concrete you'll need to use Silver as it has a built in DPM.

Most deliveries take place between 7am and 7pm. For larger items the driver may only be able to deliver to the kerbside. I would (if budget allows) look at the Ironbark product portfolio and the Kahrs 20mm products which I have attached for you here: Firstly, before anything is fitted, ensure the floor is clean and free from nails or staples that could be present if it has previously been carpeted. Give the floor and sweep or vacuum to get rid of any dust and grit or anything lying on the surface that could cause bumps.

Its very difficult to give advice without seeing (or hearing) the issue you have with the noise but it does sound like the subfloor (chipboard & installation) is moving when weight is applied so making the noise. To be laid over concreted underfloor heating and timber floating floor for the natura engineered wood? Ground floor

We’re proud to arrange a professional fitting service that’s approved, meaning the fitters have all passed a rigorous assessment process and demonstrated suitable skill and depth of knowledge. Any remaining balance due after the 4-month promotional period will be charged at 23.9% p.a. (variable). would this material be suitable to go under a carpet in an area that requires additional insulation where we cannot access under the floor boards. Do either the silver or bronze underlay have any floor levelling properties? It will be laid in part over concrete and part suspended timber floor with laminate floor on top.

Preorder Today

Continue in this way across the room. Although we need the edges to meet, it’s important to ensure they don't overlap as this will create an uneven floor.

Our wear warranty has been created to provide you with peace of mind that our quality product is ready to stand the test of time.As well as a standard fitting service, fitters also offer an uplift and disposal service. For a small fee, the fitters will not only fit your new floor, they will also get rid of the old one too. Take the underlay and lay it loosely rubber side down. Use the knife to trim it so it is level with the gripper rods. If your room includes recesses or chimney breasts, you still need to measure the complete surface area without these as the underlay will be cut around them.