If you’ve got any questions about power tool maintenance or repair, let us know in the comments, and be sure to SHARE this guide with your friends on Facebook and Twitter. Step 7: carefully reattach the motor, making sure nothing – cables in particular – are caught around the edge of the housing. Now you can keep your nail gun clean and performing at its best, ready to fire another 50,000 shots!

Nail Guns | Brad Nailer | Screwfix Nail Guns | Brad Nailer | Screwfix

Your last step is re-oiling -use the right Paslode gun oil (or a good paslode oil alternative as well) for lubing- be sure to place a couple of drops around the tool’s cylinder wall. In addition, don’t use silicone spray and PTFE spray -they clog the whole thing and creates sticky spots. The brake part cleaner you use on your truck also works nearly as well as the Paslode cleaner and is the best Paslode degreaser cleaner alternative. As such, it is essential to undertake a regular maintenance schedule to keep them running as they are supposed to for an extended period.However, just like any power tool, they require regular maintenance to upkeep their performance and last as long as possible. Because pneumatic nail guns are powered by an air compressor, they require a little more maintenance than their battery- and electric-powered counterparts.

Paslode Impulse / Pulsa Cleaner Spray 300ml - 115251

Here are some great options if you’re looking for an equally powerful but cheaper Paslode degreaser cleaner alternative. The other thing to steer clear of is WD40- this is a petroleum-based fluid and cannot work in a nailer because it wrecks the seals. Most filters can be cleaned with water and mild soap but ensure to check the user manual for cleaning specifications. For the best outcome, please provide detailed courier instructions and a contact number that we can pass on to the courier. A missing screw or bolt can make it difficult to maintain control of the gun, which can be dangerous.

Something else: You’re advantaged when you use the recommended paslode cleaner and oil – it’s specially engineered for the tools and cleans wonderfully. These maintenance practices help to keep water out of the system as well as protecting inside components from rust that could clog the feed system. Word of caution: Please follow the instructions in the documentation supplied with the spray to protect the most fragile components if you pick this over the official paslode nail gun cleaning kit. This will not only help to lubricate the operating system, but will also help to keep the inside as clean as possible, thus extending the lifespan of your machine.

Cordless Nail Gun Cleaner - Tradefix Direct

As for the air filter, it should be removed and cleaned after every two days if you are using the gun daily. Check the condition of the oil been discharged, and if it is still dirty, repeat the process until the oil comes out clean.If your tool’s still not performing like it should, then it’s probably a service or repair that you need. The air filter should also be removed and cleaned every few days if using the tool on a daily basis. Side Note: Please follow the instructions printed in the manual for your specific Paslode model all through. Each nail gun brand will have its own recommendations for cleaning, which will be included in the user manual. We offer a free UK-wide collection service, so if your nailer’s in need of more than just a quick clean, we’re here to help!

Paslode | Screwfix Paslode | Screwfix

Any of the two substitutes we have explained here will do the job and can be a good way of saving your hard-earned money. Cleaning helps to prevent dirt, debris, and other substances from clogging or damaging your nail gun. As such, you should check the trigger regularly to make sure it operates as needed if not oil it and tighten any loose screws. Spray the cylinder head assembly liberally and get rid of the gunk with lint-free cloth/ compressed air.The type of lubricant you choose for your nail gun is crucial as some lubricants may not work with nail gun components, especially rubber parts. Toolstop Limited is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 737231). Some pneumatic nail guns don’t require oil, so be sure to read the user manual before applying any type of oil. Don’t panic- it’s alcohol based so it will not hurt the O-rings or other seals (you probably know that brake parts feature plenty of rubber) or even electrical parts of the tool.