In addition, we will go over other aspects like the dimensions of the products, pros and cons, and other must-know features. Hanging bookshelf without nailing can be done by attaching command strips. Command strips are not preferable to hold a large amount of weight. Yet, the weight of the books can be carried as long as you put enough strips to attach the hanging bookshelf to the wall. Are there heavy-duty command strips for shelves?

Wall Shelves without Nails or Screws - Seven Hints Wall Shelves without Nails or Screws - Seven Hints

There are some ways how you can hang the shelves without nails or screws and are listed below to inform you. Command strips: Still, you should avoid putting too much weight on floating shelves. To provide help to proceed, the necessary steps are included below. Clean the wall: Repeat pressing for 30 seconds and put force too. If the strips are not pressed, they will fail to work. And this can lead to the falling of the shelf. Wait for almost 1 hour or more to make sure the strips can hold the shelf. If necessary, you can put more strips. How to hang shelves without nails or screws?Following below tips and information regarding shelves and if you can hang shelves with command strips or not may help you get a sufficient idea on how to proceed. Can you hang shelves with command strips? Finally, carefully place the shelf on top of the Command Strips and press down firmly to secure it in place. You can now fill your new shelves with whatever you like! Mounting shelves with nails and screws is standard but can be boring. So, can you hang shelves with Command Strips? Clean the area, peel of the film of the suction cups and press it firmly against the wall. Now put the shelf on the suction cups and that is it.

Command Strip Uses With IKEA Hacks: 8 Genius Ideas Command Strip Uses With IKEA Hacks: 8 Genius Ideas

The fourth hint on our list is the 3-Shelf Shelving Unit. It is another example of a different solution to the no damage to your walls problem. Place light, durable objects on your shelf. Without firm fasteners like nails, your shelf probably won’t be able to support heavy objects like textbooks or appliances. However, it should be able to hold small trinkets, light-weight electronics, and similar items. [4] X Research source If your shelf isn’t perfectly level, don’t worry, as you can adjust it by peeling off the Command Strips and repositioning them slightly until the shelf is level.However, the problem with installing wall shelves is that very often you will have to drill holes in your walls and that could be problematic. The solution to avoid drilling holes into your walls is to use wall shelves without nails or screws! Shelves are versatile accessories to showcase items in the room or living room or place various objects that you might use in your room or the bathroom. You do not even need to put effort or give too much time into it. It will save both your time and energy. Less weighted shelves are perfect for command strips. Glue:

Command Strips Around The House 16 Unexpected Ways To Use Command Strips Around The House

Replace your shelf after 1 hour. Give your adhesive strips approximately 1 hour to set and solidify. Then, reattach your shelf by connecting the sets of adhesive strips together. As you let go of your shelf, watch it carefully to make sure it doesn’t fall down. [3] X Research source Cleaning up messes is also time-consuming. Though nailing can secure your shelf better, it consumes more time. Rather, using command strips is a wise choice to carry less weight. Command strips are easy to use and don’t even create any mess. Your work will be clean.The corner Shelf can also be hung with command strips. But you shouldn’t put too much stuff on the shelf. Command strips might not be able to hold too much weight. If command strips are not put properly, the shelf can even fall and break. Be careful while placing command strips. Bathroom shelf: Well, glass shelves can fall and break. It is quite risky. Moreover, take plenty of command strips to hold the shelves. It will secure the shelf in place. How much weight can command strips hold? Each shelf can hold up to 800 lbs! In total it can hold up to 4000 pounds of weight! Which makes it perfect for your bathroom/laundry room or workroom or garage. How this Shelf Works Command strips are suitable for hanging plant shelves. Apart from the plant shelf, the weight of the plants will not be much. Even if you put plants on top, the command strips will be able to hold the weight up to a certain limit. You can hang the plant shelf with command strips with ease. Hanging bookshelf: