Information in a flash: With data transfer speeds of up to 40 Gbps for faster data transfer, you can stay productive when connected to all your devices. HBR3 is DP 1.4 (8.1 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 6.5 Gbps per lane. When enabled, this setting allows PCIe devices that are connected through a Thunderbolt adapter (that is PCIe devices behind the Thunderbolt adapter) to perform the PCIe device’s UEFI Option ROMs (if present) during preboot. Connectivity:multipule portsincludings audio, video, power and data as well as connections to system peripherals.

All other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. Terms Apply. Promotion ends 3 December 2023. Items are subject to availability. Max 5 units per customer. Secure Connect: The Thunderbolt adapter port allows connection to devices that have been configured with a shared key. External monitors require a certain amount of bandwidth to work properly. Monitors with higher resolution require more bandwidth.When disabled, the Thunderbolt Technology feature is disabled, and any connected Thunderbolt adapter devices are not available in preboot or within the operating system.

Power your connections:optimize workspace with DellExpressCharge allowing a chatge up to 80% in one hour. Data transfer at super fast speed at 40GB per second. Open the Windows Display Properties and go to Multiple Displays control to set the display to the extended mode. User Authorization - Allow User Notification devices at a minimum - the CM requests connection approval from the host SW and autoapproval may be given based on the Unique ID of the connecting device. I know/understand that my laptop to be fully supported needs 210W and that this only would have delivered 130W at most. But because I'm not running the laptop at full blast all the time, I would have expected it to use 130W while consuming the battery for the remaining amount and while the laptop is idle slowly charge it up and such. For additional help, learn How to Set up Multiple Monitors or How to Troubleshoot Multiple Monitor Issues.

If only one monitor is shown, while the other is not, go to Windows Display Properties, and under Multiple Displays, select the output for the second monitor. User Authorization: Approval is required for any new devices that are connected to the Thunderbolt port.

HBR3 (HBR3 x4 lanes + HBR3 x1 - 32.4 Gbps) For Precision 7530/7540/7730/7740 with discrete graphics card Power your day: Dell ExpressCharge allows you to charge up to 80% in one hour, making it the most efficient way to manage the workday.Ultimate connectivity: Thunderbolt™ connectivity makes it easier than ever to deliver power, data, audio and video as well as connect to system peripherals, no matter what system you use. Plus, with support for up to three displays, including a single 5K and dual 4K monitors, you can connect to everything you need. Ultimate Connectivity: Thunderbolt connectivity makes it easier than ever to deliver power, data, audio, and video as well as connect to system peripherals, no matter what system you use. Plus, with support for up to three displays, including a single 5K and dual 4K monitors, you can connect to everything you need Secure Connect - Allow one-time saved key devices at a minimum - the CM requests connection approval from the host SW and autoapproval is only given if the host challenge to the device is acceptable. Verify if the device is detected in Windows Device Manager and that the correct device drivers are installed. HBR2 is DP 1.2 (5.4 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 4.3 Gbps per lane