This, coupled with the brittleness of the parts, makes it important to use a solution that provides very good adhesion when hot, but allows the part to be easily removed once the base cools to avoid deformation or breakage of the part. Within this type of materials are filaments such as PEKK, PEEK, PEI and its variants with carbon fiber or glass fiber, advanced filaments with high mechanical properties, chemical properties and high dimensional stability at elevated temperatures. Polypropylene and OBC (olefinic block copolymer) offer excellent properties but are often difficult to print because they won’t stick to traditional bed prep materials.

In addition, its non-polar structure makes it resistant to chemical products, making it ideal for food packaging and medical equipment. So after repeated failing PETG prints, (somehow not sticking to bed) nomatter what settings I tried I bit the bullet and bought some magigoo.

It is the only bonding solution approved for use in BASF's debinding and sintering processes and like all other Magigoo solutions is non-hazardous, non-flammable and allows for easy removal of parts from the build plate once cooled. You will also be able to print delicate 3D models because no force is required to remove the 3D print from the bed. All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Glass Fiber PP offers some challenges unique to this material and the formulation specialists at Magigoo figured out how to make it happen. In case you have warping printing polypropylene (PP) you can use the Magigoo PRO PPGF, the adhesion will increase significantly.

The Magigoo is the opposite of the above, it's an odorless liquid adhesive contained in a container in the form of a bar with an applicator on the tip, which facilitates its use. Then contact your credit card company, it may take some time before your refund is officially posted. However, the real magic happens once the printing is done: simply let the plate cool down, and then effortlessly remove your prints with a gentle flick of your finger! I've been using this stuff round the clock for about a month now, and have absolutely nothing to complain about. The strength and toughness of PC make it an ideal FDM material for the production of functional prototypes as well as end use part, nonetheless the material does present some printing challenges.Within the framework of the ICEX Next program, BCN3D has received support from ICEX and co-financing from the European ERDF fund. Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.

MAGIGOO ABS is suitable for a variety of filaments, including most PLA, ABS, HIPS, PETG and TPU filament types. In our assortment, you will find over 130 different filaments in both traditional and original trendy colors.Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials.

Using this product with filaments other than PA filaments may result in excessive adhesion and damage to the build surface. Certain manufacturers have improved the printability of PC by the use of plasticizers or blending with other materials.To solve this problem, Magigoo has developed a tool: the Magigoo applicator, which works with the new 250 mL format of Magigoo adhesive. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. But the real benefit is seen after prints are completed when using a heated build plate: just wait for the plate to cool down and then remove your prints with minimal force! Use on other plastic based surfaces, including sheets is recommended to provide strong adhesion and preventing the part to fuse to the sheet. I spray the build plate between prints and just smear the water over the bed to reactivate and spread out the glue.