Stonelux® The Stone Range is suitable for all construction, commercial, retail and domestic projects. COLOUR MATCHING & BESPOKE COLOURS As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. This may be noticeable with rougher woods, open end grains or indeed deep colours. If wood has been exposed and dried out for a long period of time, this may also draw the more of the product away from the surface and into the wood structure. Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay. Wash the surface to remove grease. Grease can show up anywhere, especially in the kitchen. After you've brushed away any large pieces of dirt, scrub the stone with a nylon brush or a sponge. Use a mild cleaning formula such as dish detergent mixed with water. [2] X Research source Rinse the wall with clean water to remove any remaining debris. [3] X Research source It is suitable for all kinds of concrete base, thin plaster base and masonry surface. It can be sprayed on curved surface, special-shaped wall surface and various three-dimensional surface. It has a wide range of applications.

MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION. There's so much choice out there when it comes to paint and it can be difficult finding the right colour and finish for your home. There's also a whole range of brands to choose from including Dulux paint, Farrow & Ball colours, Valspar and our own GoodHome range. It has air permeability and waterproofing performance. It can effectively prevent rainwater intrusion and increase the durability of the film while permeating water vapor. Be mindful that it is waxed-enriched and that once these waxes are dried, they act to repel liquids, which would include an additional coats. Don't try to coat the whole project with one coat before getting onto the next coat. Instead it is better to paint sections in in time chunks of 2-4 hours.

You don’t want to leave any soapy residue, so it's usually a good idea to do a few rinses to make sure all soap is all washed off. Simply provide us with samples of your existing colour range, or the stone colour you wish to match, and we will do the rest. Once the match has been formulated, we will send you a sample of your approval. BESPOKE STONE REPAIR SYSTMS Stonelux The Stone Range gives a durable, lightweight and cost-effective stone finish to almost any surface. Ideal for use with GRC, GRP, concrete, lightweight mouldings and façades. It has high-build coatings imitating natural stone, marble and granite to create luxurious and heavy natural stone effect with rich layers and colors.

Water-borne emulsion is non-toxic and environmental friendly, and meets the requirements of environmental protection. Granite coloured sand, as a coloring pigment, has high color retention and stable coloring development effect in the life of the coating. When it comes to colour, the current most popular options are white and grey paint for an ultra modern and clean look, ideal for frequently changing rooms. A paints finish will affect the overall appearance, feel, and durability of your paint, so it’s important to understand the differences to achieve your desired aesthetic. Matt paint has a non-reflective finish, chalk paint has a matt, shabby-chic finish, while eggshell paint is low-sheen and durable. Additionally, satinwood paint has a subtle sheen and is great for interior woodwork, while gloss paint is high-shine and ideal for exterior woodwork and metal surfaces. If you are able to bring the stone outside, you might also consider using a power washer that is intended for cleaning. Arbitrary seam design and splicing can be achieved. Various visual effects and shapes can be formed by single or multiple gun spraying process.