Welcome To The One Stop Rubber Shop We pride ourselves on delivering the highest quality products and customer service. If it's made of rubber, we can supply it. Paintability: Paintable with acrylic and alkyd paint. Alkyd paint may slow down drying process. Always test in advance. Polymath has team members and contributors worldwide and a growing list of over 50 global service providers. For o-rings with internal diameters between 54 and 600 visit O-Ring Tolerances 54.84 ID to 600 ID Cross Section Flooring installation is a specialist job and we always recommend hiring a professional floor fitter. At The National Institute of Carpet and Floor Layers you’ll be able to find a fully qualified fitter near you. What is the Best Adhesive?

Q. I’ve had great success using Poly Max, but find they work the best on my driver, do you make them for putters also? Preliminary treatment: Surface must be clean and free of dust and grease. Use of primer not required. Surfaces may be slightly moist. Surface must be solid.

Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice. Sealing: Applications in construction: connecting joints in (plastic) window frames, roof fascias, roofs, roof gutters, walls, skylights and chimneys. Sealing joints between window panes and frames. Not suitable for polyethylene (PE), polypropylene (PP), PTFE, PA (nylon), acrylic glass (plexiglass) and bitumen.

Curing time may vary depending onthesurface, product quantity used, humidity level and ambient temperature. Fixing: e.g.skirting boards, laths, timber framework, window sills, doorsteps, roof fascias, panelling and insulation material, gypsum boards, polystyrene ornaments and decorative edgings.

Silicone Products

PTFE O-rings could be a more economical alternative to FFKM materials, but they are not easily compressed and have little memory to be able to return to their original form. This can be a disadvantage if under permanent strain and may not create the best lasting seal. PTFE is a highly resilient O-ring material unaffected by virtually all known acids, alkalis and solvents. It is tough, abrasion resistant and capable of withstanding temperatures between -200°C to +250°C. It also possesses outstanding weather, ozone and electrical resistance. For this reason, it is the O-ring of choice for use in aerospace, food, pharmaceuticals and telecommunications industries.