With resin bonded paving, soak-aways and channel drains must be installed to prevent run-off which could lead to flooding. It is not intended to be used for vehicles or heavier applications – its whole raison d’etre is to be a lightweight product that simplifies the resin bound process.

Over-saturation, caused by using more liquid than the recommended amount per square metre, will leave the surface wet and un-bonded. The system will reach its initial strength after 24 hours of drying and will achieve full strength after 7 days.

The scatter system installation gives the appearance of loose gravel, but with my fewer maintenance requirements.

X-Grid is a recycled, UK designed and manufactured ground reinforcement grid which is able to withstand up to 420 tonnes per sqm, is easy to install and is fully SuDs compliant.The next step is to apply the EasiHold, but those stepping stone flags and the ground-level light fittings need to be masked off to prevent the EasiHold Resin covering their upper surface.

If you are thinking of having a resin bonded paving surface at your home or public facility, please contact our team. Wet Pour Surfacing Wet pour surfaces are an impact-absorbing, rubber crumb floor covering which is traditionally used in playgrounds, parks and other recreational areas. m² and 1x5 Litre Jerry can covers 6-8m² using Pour On method per coat, ensuring your stones are evenly coated. Use a maximum of 1 litre per m2 when pouring on, and 1 litre per 2m2 when applying by spray application. Sprayers can be flushed with white spirit between GravelHold uses which will help to remove any residue and prevent the binder from curing inside the sprayer.Our binder is usually not affected if there is rain after installation which is uncommon with pour-on resin binders. It is recommended that a resin bound surface should be laid to a depth of 15mm for a pool surround, footpath or terrace and 18mm for a driveway and car park. It measures about 10 square metres and there’s a handful of flagstones set into the gravel to make it safer and easier for the homeowners, their children, and the family pets to enter and leave the building via that kitchen door. GravelHold is a next generation manufactured, UV-resistant resin which transforms loose and crunchy stones into a clean and neat landscape surface. Thanks to its high resin content, you can also rest assured that GravelHold will outperform any water-based loose gravel binders and is supplied with a 2 year guarantee.