Additionally, consider using a foam pad suitable for polishing, as it helps distribute the polishing compound evenly and minimizes the risk of swirl marks.

A random orbital (or dual action) sander is best for cars. A standard orbital sander can leave unsightly swirl marks whereas a random tool version will not. The reason being that a dual-action sander works in two ways – it moves in a random pattern while orbiting in a circular motion at the same time. Pay special attention to the ventilation holes around the body of the tool. When these holes get clogged with dust, this increases the risk of the sander overheating and possibly breaking. Hopefully, this article has been helpful to you. Thanks for reading and go and make that car shiny again!Whether you need a reliable floor polisher to assist with facility management tasks or a rotary polisher to finish furniture or shop fittings, Festool will have a tool to meet your needs. For those who prefer a more hands-on approach or have limited access to power tools, hand polishing is an option worth considering. It combines the benefits of an orbital sander with a gentle and safe approach for automotive surfaces. Once you have completed the job to your satisfaction, switch to a finishing pad and finishing compound.

The nine sanding pads (P80, P120 and P240 grit — three of each) included with this sander, plus the three polishing pads, should see you through a considerable amount of work. You’ll know when it’s time to change a pad, as there’ll be bare patches in the sandpaper, and the sander may work less effectively. This is particularly important when working with dark-colored or sensitive paint finishes, as any imperfections can be easily visible. 3. Potential Risks and Considerations Begin by examining the sander to make sure it is in proper working condition – this safety precaution should be taken before using any power tool. If you are using a circular polisher, slower is better. Therefore, a speed somewhere between 1,000 and 2,000 RPM’s is recommended. This tool can get quite hot, especially when used at high speeds.USAGE] - Can be used directly for polishing, or used with polishing liquid/paste/powder. It can repair the grinding marks left by the previous process and make the polished surface get mirror effect. When using the polishing machine, please avoid staying in the same position for a long time, so as not to expose the paint primer. When polishing your car with an orbital sander, controlling the speed becomes very important. There are single-speed orbital sanders, but those won’t be effective for polishing. All air sanders are typically variable speed, but there are single-speed electric sanders.