No more than 50mm of exposed rung should be visible when the guard is tight to one side of the ladder. Other Controls Alternatively, for interior ladders, where only a simple warning is required we also offer our L0 ladder access warning sign.

The L3 Ladderguard fits ladders with rung lengths between 250mm and 360mm and provides approximately 1.95m of ladder coverage height. Included with the ladder is a conversion kit to change a lifting door into a swing-down one to match the ladder. It also has a hook for lowering the ladder, though not a pole for the hook itself. Tied into this will be the ladder’s maximum weight allowance. When you look at that data, keep in mind that it’s not just your own physical weight you should factor in – you’ll also need to consider what you’ll be carrying up and down the ladder to ensure you don’t risk exceeding its weight limit. Within buildings, where fixed ladders are used to access internal plant, equipment and various levels within the There are several things to consider when shopping for a good loft ladder. To start, you’ll want to look at the size of the ladder you need. You’ll need to know the measurements from floor-to-floor and floor-to-hatch, the storage measurements, and the loft opening measurements.This loft ladder comes with the hatch, and the hinges on the trapdoor are hidden, so it’s easy to paint, stain or varnish, to match your home’s character. The ladder has a maximum weight load of 150kg and is tested and certified to the European Ladder Standard. When not in use, always collapse the ladder and keep it in a safe place. This will protect it from damage and ensure it is ready to use when needed. What is the maximum weight capacity for a telescopic ladder? For some, an attic is wasted space simply because it’s a hassle to get to. Closets and trunks are stuffed, while the loft – which could potentially provide plenty of handy storage – remains empty. But your loft doesn’t have to be a mystery if you have the right ladder to reach it. and may be more appropriate inside a building where access to the ladder is generally restricted to employees. Before assembling the ladder itself it is just as important to make sure the area you are working in is as safe and secure as possible . This is easily done by observing a few basic factors.

Key specs – Max load: 150kg; Max floor-to-floor height: 3.25m; Material: Zinc plated steel; Handrail: Yes; Hatch: Yes; Pole: Yes A ladder guard that is not wide enough for the ladder it is fitted to. Small feet can still climb the exposed rungs and the guard could slide even further to one side.Carrying slots, if provided, should be vertical (along the long axis of the guard) not horizontal where they could be used as a foothold. Number of access points onto the scaffold – including the number of levels within an occupied or accessible building that lead onto the scaffold.

building, a Facility Manager may choose an L1 or L2 Ladderguard. These ladder guards are shorter than the L3 and L4

Health and Safety Executive - Safety alert

The fencing should be installed as the scaffold is built, lift by lift, which means either writing this into the scaffold contract or having a separate contractor working with the scaffolding contractor so that there is no lag between the scaffold going up and fencing being fitted. Where unauthorised access has been gained the result is often a fall from height. This can cause life changing injuries and fatalities are not uncommon. BS EN 12811-1:2003 Temporary works equipment- Part 1: Scaffolds - Performance requirements and general design The Work at Height Regulations 2005 – Regulation 8 and Schedule 3 Part 2 Clause 11, Schedule 6 Clause 5 References