For most getting into the mini-ITX cases, you can't go wrong (and may not go any further) going with the NR200. It's much smaller than the big cases you may have been using, and it's easy to build in. You don't necessarily have to get the Max version if you weren't planning on going with an AIO build. However, if you were, then it doesn't get much easier than the Max with the large 850W PSU and AIO already installed. At 50% with no gasket, the air speed was below the resolution of the anemometer (0.1 m/s), so I had to bound the calculation. We see a 2X improvement at max fan speed and a >4X improvement at silent fan speeds. The CPU Cooler Test - I'll get to this in more detail, but it convinced me thermals are acceptable which is not really the case. However, you can fit a PC in here. There’s no AIO support, nor air filtration. So yes, there are sacrifices, but it offers among the easiest build processes – chances are you’ll be done building within the hour and have a very tidy end result. It will also happily fit huge triple-slot graphics cards, despite its ultra-compact 12-litter frame, and with a fancy ‘Cobalt’ PCIe 4.0 riser cable, there’s hardly a thing about this case that isn’t ultra-premium. It even has a carrying handle. I started with some tests of the CPU and GPU without the shell on. This allows us to get a sense for how the coolers perform in the best case scenario (open air) and serves as a sort of thermal performance target. For all the various configurations, mods, etc., I used Cinebench for CPU testing, Furmark for GPU testing, and Unigine Heaven for mixed/gaming.

Now is a good time to mention my goal: maximum performance with silent fans. That means running all fans at around 50%. Eventually I'll set up a proper fan curve, but for now, and most of the rest of the tests, the fans are all just pegged at 50%. There's only a slight performance reduction here, again indicating sufficient airflow, and this is our CPU thermal performance target. It goes without saying that this is a unique and visually striking case, whether you're a fan of the particular aesthetic or not. I'm going to skip commenting on the looks and artistic merit to focus on the practical aspects instead. This case needs custom length power/fan cables (without sleeves, since you can't really see them anyways) because space is so limited. I recommend using PET hookup wire, since it's easy to work with and very thin. As I'll get into later, maximum airflow is very important. Louqe's CPU Cooler Test and their support recommend adding an A12x15 fan on top of the NH-L12 GE cooler to achieve silent performance. You can get extra 120mm fan clips from Noctua for free to mount it, and you should get "silent" full performance!I'm fairly sure that the same issue affecting the CPU performance is affecting the GPU. It's just not able to pull in cool air from outside. People using triple slot GPUs seem to have fewer issues, presumably because the fans are closer to the shell. A duct would probably help this, but it would have to be custom-designed for every model. Considering the total size of this offering and its support for some of the largest graphics cards on the market, thermal performance holds up extremely well. There are not many fan formations – only two fans can fit in the case – but it is clear that airflow was a major consideration during design.

We can actually quantify the effect of these poor design choices and how much improvement the gasket offers by measuring the airflow. Aesthetically, the Raw S1 has a unique look that blends a modern style with aggressive, “gamer”-esque patterns and details. Red details on the interior, sand-blasted aluminum, and interesting cooling lines accentuate the look. However, most of the build is a simple sheet of aluminum. LOUQE has masterfully balanced these aesthetic choices with performance thanks to small features like a floating top plate and uni-body construction. It is extremely similar to the Corsair One in size, while their designs differ dramatically. Both are slim, vertical cases that are 12 liters in volume that can fit almost anywhere. And when all said and done, the Louqe Raw S1 is hands-down the nicest ITX chassis I’ve ever had the honor of working with. From its stunning, elegant single-piece external shell to the simplicity with which a system inside it pieces together, the Raw S1 is a chassis that I’m going to remember. Whoa! This is awful. CPU performance has tanked, and GPU temps are through the roof. The Air Temp tells the story here: even with an exhaust fan, the case is not able to get the hot air out. Because of this, I would actually say the Raw S1 is perfect – because it does a 100% job at achieving what the designers set out to achieve: a simple, easy-to-work-on minimalist system that looks the part and cools well.There are two other cooler options recommended by the community: Scythe Big Shuriken 3 Rev. B and the Thermalright AXP120-X67. Both of these have top mounted 15mm fans, but a 25mm fan can also apparently fit, closing the gap to the shell with a little more wiggle room.