Start by identifying which brake system is on your bike. The easiest way is to look at the lever. The table above will help you identify the brake system based on the lever design. You can also look at the caliper to confirm the brake system type. Take note of the pad type in the last two columns. Most of our e-bike use the Shimano B01S compatible pad.

SHIMANO Unisex - Adult B01S/B03S/B05S Brake Pads, Light Brown

mount new pads, try not to touch pad surface with greasy/sweaty/dirty hands, if you do its not the end of the world though I do have Shimano rotors that say "resin only" but prices on rotors don't seem that bad so I was thinking maybe semi metallics might work? Question 2. front rotor looks great. rear maybe not. there is a slight groove worn in it. not very deep but noticable. Should I just replace the pads and keep riding or is this a problem. there is still pad left and it cant see where it would be rubbing on some metal besides the pad. Pics below. While Shimano's genuine products are designed by Shimano with utmost care to ensure their safety, quality and function, the safety of those counterfeit products is not assured and may lead to serious accidents. The Shimano B01S is one of the most common brake pads used in the industry. Almost every bicycle repair shop will have B01S. This pad is used on at least 45 different brake systems spanning across many different brands. It is used on hydraulic and mechanical disc brakes.Will fit; BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M445, BR-M416-A, BR-M416, BR-M415, BR-M375, BR-M365, BR-T615 The disadvantage is that Hydraulic disc brakes systems are several times more expensive than mechanical disc brakes. However the actual brake pads are about the same cost.

Information for the counterfeit products of our disc brake pad

as Dan said, go with the better rotors (compatible with metal pads), then when you dont like the resin pads you can try the metal pads (sintered), or just go straight to the metal pads not sure what I should do... here are some pics. can you tell if there is a spacer missing?? Could there be the wrong pads installed? Seems strange they are both running low on the rotor. Now I'm addicted and riding quite a bit more. I only have a month on this second pair of B01S pads and they are nearing replacement already. Brilliant Bikes Ltd, 13-14 Broomhall Buildings Chobham Road Sunningdale Berkshire United Kingdom SL5 0DU Is the B01S about as good as I can do or are there better alternatives? They are fairly cheap so not a big deal.RT66's have a narrower braking band to work with shallower G01S type pads and compatible brakes (e.g: SLX, XT) which would explain the deeper (B type) pads wearing more of the disc surface rather than being positioned lower. Hydraulic disc brakes are also less fiddly to set up as both pads move toward the rotor vs. mechanical disc brakes where only one pad moves toward the rotor. The Hydraulic disc brake systems we use can self-adjust at the pad wears down, resulting in less maintenance. To our regret, recently counterfeit Shimano products have been illegally sold at local retailers, online flea markets and other online marketplaces.

Brake Pad replacement for Shimano B01S, and is this Brake Pad replacement for Shimano B01S, and is this

The counterfeit brake pads are difficult to distinguish from Shimano's genuine products by appearance. Please see the photos below.

Looks like my rear pads are down to 1 mm or less. front is also very close. I have BR-M447 brakes and Shimano has only one replacement pad the B01S - they say to only use resin pads.