So, what is the difference between both of them? A max SDS drill is bigger than a regular SDS drill, and as such, it can drill bigger holes, it can chisel tiles, and it can break concrete faster. What is an SDS Drill Used For? The tool is used for drilling holes into masonry, breaking concrete, and chiseling tiles. That’s why it often comes with three modes – Hammer drill, hammer, and drill modes. When you select the hammer drill mode, the drill bit spins and also hammers the surface at the same time. That’s why it is able to drill holes faster. If longer periods of use are required, an option is to obtain additional accessories and alternate their use. Your workshop isn’t complete without an SDS drill because of the usefulness of the tool. And you should not just choose any SDS drill at random. It is better to follow the tips below.

We want you to get the best possible performance out of your tools, so we’ve put together some tips to maximise your SDS Plus accessory’s life and help prevent overheating and frustrating shank breakages. All SDS hammer drills are well-greased before sending them out of the factory. So, it could take you up to 6 months before you need to grease your SDS hammer drill again. Follow the steps below to grease your drill. Also, there are different ways to grease different SDS hammer drills. Most power tool manufacturers distribute grease specifically aimed at SDS shank lubrication and some power tools are even supplied with it. How often you use your SDS hammer drill will determine how often you grease it. What is the Difference Between an SDS Drill and a Hammer Drill? Autumn Statement: Workers to pay less in national insurance – but rate cuts don't offset the freezing of personal tax thresholdsNatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024.

When you select the drill mode, it spins only. The hammer mode is meant for breaking concrete only. It is used to break concrete during demolition. You need the right drill bit for different tasks. The SDS hammer drill is specifically created for hard tasks. How Do You Grease an SDS Hammer Drill? 4 StepsGood adhesion – continuous lubrication and reduced consumption as film stays between lubricated surfaces. If you would like further technical advice on any of our products, simply fill in our ‘Ask and Expert’ enquiry form http://www.armeg.com/index.php?route=askanexpert/default Examples of high temperature grease suitable for SDS Plus shanks include Lithium grease and Molybdenum Disulphide.

Avoid using accessories for longer than 10 – 15 minutes. If this time is reached, the accessory should be removed from the power tool and allowed to cool in still air for at least 15 minutes. So what’s the main cause behind shank breakages and how can they be prevented? We worked with our Technical Department to find out more. Excellent EP and anti-wear properties – protects equipment against extreme loading and helps minimise bearing component wear.

Specifically formulated for rubber to rubber lubrication where any effects such as hardening or swelling of the rubber must be avoided. It therefore can be used on automotive hydraulic brake and clutch components where compatibility with natural rubber and SBR seals are involved. It may also be used to assist the assembly of natural and synthetic rubber components for automotive brakes or clutch systems and suspension units. Both employees and self-employed workers will pay less in National Insurance from next year, Chancellor Jeremy Hunt has announced in today's Autumn Statement. As you would expect, SDS drills are more expensive than Hammer drills because they handle tougher tasks. Can You Convert a Normal Drill to SDS? A rubber compatible grease formulated to be compatible with natural rubber components in a range of cars, light commercial vehicles and any other vehicle using rubber components, particularly brakes and clutch hydraulic mechanisms.