Removes build up from polish and other maintenance products. Important! Do not allow into open gaps in the floor. May cause permanent stain. Bona Mega Natural produces a subtle rich tone and is therefore not recommended for use over Bona White primer if you are looking to retain a true white look. Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times. To mix smaller quantities of lacquer and hardener, mix the required amounts using the Bona Traffic Mix Bottle. 1 litre of lacquer corresponds to one part hardener, 2 litres to two parts and so on. A silane based adhesive, it has a ‘quadruple crosslinking’ formulation that delivers ultimate durability and the fast possible bonding. Keeps even the largest solid boards in place. No discolouration or hollow spots. No primer required.

Interior: Commercial floor applications such as hotels, restaurants, airports, schools and nurseries The blue belts are a premium abrasive made of an optimal blend of zirconium and silicon carbide for the perfect balance between aggressiveness and surface finish. They are very high in durability and have an antistatic coating which helps prevent clogging and ensures cooler and longer runtime as well as better dust extraction. New sharp points are created during use due to the character of the grit material.NOTE: Use a clean applicator for sealer and a separate clean applicator for finish. MIXING INSTRUCTIONS

Bona Traffic HD is the perfect choice for floors where extreme levels of traffic are expected such as retail shops, halls, museums, galleries and other public places. Ready-to-use maintenance protection for varnished wood floors. It revives scratched and dull surfaces and offers continued protection against wear. Important! Do not use on waxed or oiled floors. Diane – I’ve never heard of that nor seen that. It doesn’t make any sense to me. That sounds like it’s a different issue related t drying/curing which can happen when the temperature/humidity is not well regulated in the home. It should be between 65-75 degrees (ideally 65-70) while floors are done and up to 30 days afterwards. If you don’t do this you can see that separation, regardless of the poly. This is important even if you are away on vacation or not living in the house yet. The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. Also avoid damp mopping the floor during this time.Bona White primer should be used to create a ‘white washed’ look to a wood floor - ideal when creating a Scandinavian style interior!

An everyday concentrated floor cleaner for all types of interior wooden floors. Ideal for daily maintenance and deep cleaning.As we know, the sheen on a wooden floor looks different depending on the angle you’re viewing it from, for example, a floor may appear glossier from a lower angle but matt when viewed from above. Ensure that floors to be varnished are clean, dry and free from all traces of dust, dirt, grit, oil, wax and any other surface contaminates before application.

Feather out all turns. Do not push too hard or too fast to avoid drips flying off the floor coater. Bona Traffic HD raw eliminates this inconsistency – the floor will appear absolutely natural and untreated no matter what angle it is viewed from.

Pallet agreements which are about to expire

The Zirconia option is a premium abrasive made of an optimal blend of both zirconium and silicon carbide for the perfect balance between aggressiveness and surface finish. They are very high in durability and have an antistatic coating which helps prevent clogging and ensures cooler and longer runtime as well as better dust extraction. New sharp points are created during use due to the character of the grit material. Optimal application conditions are between 18–25°C and 30–60% relative air humidity. High temperatures and low humidity shorten drying time; low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13°C. Be sure floor is free from wax, polish, and oily residues. If contaminants are present, use the full Bona Recoat System™ to ensure adhesion. Otherwise, follow the Bona Prep® process. Adhesion failure can occur if these recoating processes are not followed and the floor has not been tested for compatibility. CURING