Read our full Jasco Enbrighten Z-Wave No Neutral Smart Dimmer review Smart light switch accessories

This is a feature we like: If a smart light switch has this feature in its app, it will automatically turn your lights on and off randomly while you're away, to make it look like you're home. Frequently asked questions Do I need an electrician to install a smart light switch? Most smart light switches will work with Alexa, Google Assistant, or Apple HomeKit, so you can connect them to other smart home devices, and control them using your voice. Here’s our video with the reasons why your battery light is on, and we go into a little more detail below. 1. Broken Or Slipping Alternator Belt For those who have one of the best smart home hubs, the Jasco Enbrighten Z-Wave dimmer is a very good smart light switch. It's a cinch to install, as there's no neutral wire needed and the terminals are agnostic. A simple paddle switch handles both on/off duties as well as dimming functions. You will notice it as the white or green-colored substance around the terminals and on the connectors. However, you don’t want to touch it because it’s highly caustic. We will discuss how to handle this problem deeper in a few minutes. 7. Bad Engine Ground StrapIf that's all you need, then you're all set. However, more adventurous types can also modify the switch's code to change what happens when you press its switch. The Enbrighten can also work with a host of other smart home systems once you connect it to a hub, too. We only wish it came with a cover plate. In fact, a normal reading would be 13.5 to 14.5 volts. Anything lower or higher than this indicates a problem with the alternator. 2. Inspect The Alternator/Serpentine Belt Even if you don't have a three-way switch, there's an easy way to get around it; many smart light switch makers now offer a remote, or companion switch that's battery-operated. All you have to do is attach the switch to your wall using screws or adhesive — no wiring required. The only downside is that the switch, like all of Lutron's products, must be linked to the Smart Bridge. The bridge itself must be plugged into your router so that you can control it from your smartphone. The serpentine belt is responsible for running the alternator along with other accessories. It will usually last 50,000 to 100,000 miles when it’s taken care of. If the serpentine belt begins to fail or it starts slipping, you are going to notice trouble running the alternator.

Depending on what you're doing, your console's battery should last between two and a half to six hours for an original console (released between 2017 and 2019), or four and a half to nine hours for the revised model released in 2019. The Nintendo Switch Lite is rated for three to seven hours, while the Switch OLED model gets the same four and a half to nine hours as the revised version.craiglloyd I did an embarrassing amount of spudger prying pretty much everywhere along the top/bottom of the battery, I actually broke a few spudger tips in the process so that might reveal something about my approach… Sometimes a battery can’t be charged even though it’s in good condition. If there’s corrosion built-up on the terminals, the voltage coming from the alternator won’t be able to juice up the battery. Corrosion is caused when the hydrogen gas collides with the air. A dying alternator is going to give off several signs, including dimming headlights and malfunctioning electrical equipment. If it’s not resolved promptly, you will end up with a dead car battery. 3. Bad Alternator Pulley