Connect the Serial to the USB adapter to the PC. Open the Device Manager and under 'Ports' see a COM port associated with the adapter. Make note of the COM port number. x GE RJ45 Ports, 2 x GE RJ45 WAN Ports, dual WiFi radio, with embedded DSL and 3G/4G/LTE modules, 128GB SSD onboard storage.

SMB Protection (IPS, Advanced Malware Protection, Application Control, Web & Video Filtering, Antispam, plus FortiGate Cloud subscription and FortiCare Premium) Interfaces SFP1 and WAN1 and SFP2 and WAN2 are shared SFP or Ethernet interfaces. Only one of each of these interface pairs can be connected to a network. This allows you to, for example, connect SFP1 to an SFP switch and WAN2 to 10/100/1000BASE-T Copper switch. The FortiGate 80F and 81F includes the SOC4 and uses the SOC4 CPU, NP6XLite processor, and CP9XLite processor. The SFP1, SFP2, WAN1, and WAN2 data interfaces connect directly to the NP6XLite processor. The 1-6, A, and B data interfaces connect to the NP6XLite processor through an integrated switch fabric. If there is no Ports section listed ensure the proper drivers are installed for the adapter to function.

Documentation:

This command changes the configuration, so bypass mode will still be enabled if the FortiGate 80F Bypass model restarts. FortiGate 60E/61E-POE, FortiGate/FortiWiFi-60F/61F,FG/FWF 40F, FortiGate-80F, FortiGate/FortiWifi 60C, and other small business models. FortiGate 80F, 81F, and 80F Bypass fast path architecture | FortiGate / FortiOS 6.4.6 | Fortinet Document Library On the FortiGate 80F Bypass model, the WAN1 and 1 interfaces form a copper bypass pair. The SFP1 interface is not part of the bypass pair. On the GUI and CLI the 1 interface is named internal1.

In bypass mode, the bypass pair acts like a patch cable, failing open and allowing all traffic to pass through. Traffic on the bypass interface that is using VLANs or other network extensions can only continue flowing if the connected network equipment is configured for these features. Comprehensive Support, Advanced Hardware Replacement (NBD), Firmware and General Upgrades, Application Control Gartner, Magic Quadrant for Network Firewalls, Rajpreet Kaur, Adam Hils, Tom Lintemuth, 20 December 2022. Threat Protection performance is measured with Firewall, IPS, Application Control, URL filtering, and Malware Protection with sandboxing enabled. On the FortiGate 80F Bypass model, the WAN1 and 1 interfaces form a bypass pair. Interface 1 (internal1) is part of a hardware switch named internal. To enable bypass mode, you must remove internal1 from the hardware switch.Comprehensive Support, Advanced Hardware Replacement (NBD), Firmware and General Upgrades, Advanced Threat Protection Bundle (IPS, AV, Botnet IP/Domain, Mobile Malware, FortiGate Cloud Sandbox including Virus Outbreak and Content Disarm & Reconstruct Service, Application Control)

You can manually enable bypass mode if the FortiGate 80F Bypass model is operating in transparent mode. You can also manually enable bypass mode for a VDOM if WAN1 and 1 are both connected to the same VDOM operating in transparent mode. Select 'All session output', select browse and save the log file to a location that can be found later. Consider adding a name and date to it.Eight 10/100/1000BASE-T Copper (1-6, A, and B) connected to the NP6XLite processor through the integrated switch fabric. A and B are FortiLink interfaces. Services on all other products and for other use cases, please refer to the relevant product data sheet. FortiGate Hardware and VM

Advanced Threat Protection (IPS, Advanced Malware Protection Service, Application Control, and 24x7 FortiCare) Comprehensive Support, Advanced Hardware Replacement (NBD), Firmware and General Upgrades, UTP Services Bundle (IPS, AV, Botnet IP/Domain, Mobile Malware, FortiGate Cloud Sandbox including Virus Outbreak and Content Disarm & Reconstruct, Application Control, Web & Video Filtering and Antispam Service) The FortiGate 80F Bypass model will continue to operate in bypass mode until the failed FortiGate 80F Bypass model is replaced, power is restored, or bypass mode is disabled. If power is restored or bypass mode is disabled, the FortiGate 80F Bypass model resumes operating as a FortiGate device without interrupting traffic flow. Replacing a failed FortiGate 80F Bypass model disrupts traffic as a technician physically replaces the failed FortiGate 80F Bypass model with a new one. Manually enabling bypass modeUnified Threat Protection (UTP) (IPS, Advanced Malware Protection, Application Control, Web & Video Filtering, Antispam Service, and 24x7 FortiCare) The FortiGate-80F-Bypass offers a pair of bypass ports that help organizations avoid network communication interruption due to device faults and improve network reliability. Hardware Unit, 24x7 Comprehensive Support, Advanced Hardware Replacement (NBD), Firmware and General Upgrades, UTP Services Bundle (IPS, AV, Botnet IP/Domain, Mobile Malware, FortiGate Cloud Sandbox including Virus Outbreak and Content Disarm & Reconstruct, Application Control, Web & Video Filtering and Antispam Service) plus term of contract Advanced Threat Protection (IPS, Advanced Malware Protection Service, Application Control, and FortiCare Premium)