This means that it is fully compatible with both Dryzone Renovation Plasters and Dryzone Express Replastering.

Once Dryzone is installed it uses the moisture contained in the damp wall to diffuse where it is most needed before curing to form a water-repellent resin. Unlike the sand and cement renders that are often used, Dryzone Renovation Plasters are non-destructive to the underlying masonry, do not require gauging and present a warm surface.To issue Biokil Crown Guarantees an Approved Contractor must have achieved the required standard of training. This means that it is often necessary to replaster the affected wall after the treatment of rising damp.

Kit components: 2 x Dryzone Mould Eliminator 450ml, 1 x Dryzone 100 Mould Sanitiser 450ml, 1 x Microfibre cloth, 1 x Pair of protective rubber gloves. For heritage projects, or where replastering needs to be minimised Dryzone Renovation Plasters should be used. The unsightly appearance, musty smells and stubborn staining can transform a beautiful space into a dank and unhealthy environment. The insert for the car is resistant to deformation, retains its flexibility to temperature changes, and is resistant to chemicals and abrasion. The plaster blend which contains a high proportion of natural hydraulic lime and calcite is highly breathable, quick drying and suitable for heritage applications.Please note that given the current circumstances alot of carrier companies are struggling to keep up with demand and although we do book these deliveries as next day services, the carriers cannot always fulfil these and an extra day may be required.

Creating the best possible barrier to rising damp minimises moisture in the wall, blocks the build-up of ground salts, and reduces heat-loss. Using a BBA certified product, such as Dryzone, is your assurance that the product has been proven fit for the purpose it was designed for. The step-by-step guide on this page outlines how to use Dryzone to damp-proof a standard brick wall.Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday). The rods are an even more effective alternative to the industry leading Dryzone Damp-Proofing Cream and are suitable for situations that require maximum performance, guaranteed dosing or increased treatment speed. In all cases the most effective target site is to drill horizontally directly into the mortar course, preferably at the top of all perpends of the selected course. The Dryzone System range of products is designed to enable you to eliminate rising damp in these situations and renovate the interior walls that have been effected by it.

Once the replastering has been completed and the walls have been given the correct amount of time to dry out, it is then possible to reinstate the skirtings and redecorate the wall. Dryzone Damp-Proofing Cream is the original high performance injection cream, for the purpose of treating rising damp. When treating rising damp, it is important to use a high-quality product that is capable of a level of performance as close as possible to a physical DPC.

Once installed, the high strength formulation spreads along the mortar bed before curing to form a damp-proof course. Dryzone dual-action Mould Treatment Pack immediately cleans the mould and protects from further infestation by destroying the mould organism and spores. Proven to work in situation where the wall is: Highly saturated, Cold or warm, Very porous, Of high or low alkalinity. Failure to treat rising damp properly can result in a house that is unpleasant to live in and difficult to sell, so it is important to choose an effective method of treatment. However, it was still used in conjunction with an industry standard sand:cement replastering system that was slow and expensive to install, was unpopular with homeowners and heritage bodies and could often result in a cold wall surface that could be vulnerable to condensation.