This finish nailer comes with a 360° tool-free air exhaust that allows you to direct the wastes away from your face. Heat-treated aluminum housing ensures it is lightweight yet durable. Additionally, there’s the tool-free nose latch that allows for faster clearing of nail jams. And above all, there’s the no-mar tip for the protection of your work surfaces.

At only 8.6 pounds, this item is compact and lightweight, providing the comfort and versatility necessary for finishing your job on time. Besides, you’ll experience consistent nailing each time you pull the trigger. Furthermore, there’s the adjustable hook with the belt that holds the pencil, ensuring that you don’t while taking your measurements and even making marks. Its head is 80% smaller hence allows the user to work with this tool even in tight spaces. Another fantastic feature about this tool is its 360 degrees adjustable exhaust system that directs the exhaust away while operating. It is best for decorative trim, molding, paneling, baseboards, furniture, kitchen cabinet, window casing, bedding, and chair rail. In addition, Makita XNB02Z features an anti-dry mechanism engineered to help prevent damage to the work surface and from driving blanks.This 16-gauge straight finish nailer comes in a tough new industrial design that is built to serve for over an extended duration. The magazine is spacious and can hold up to 100 16GA straight finish nails from 3/4 In. to 2-1/2 In in length.

Although there are some debates around the classification of what constitutes as a brad nail. As far as we are concerned (20 years plus in the industry) a brad is either a 21 Gauge or 18 Gauge Nail. Benefits of Brad Nails NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip The finish nailer has a tool-free depth-of-drive adjustment with detents that allows for proper setting of nail heads As Brad nailers operate thin 18-gauge brads in lengths up to 2” long, they leave a lesser hole, therefore, less likely to split thin workpiece" (bestofmachinery.com) Conclusion:The 525500 also boasts its convenient design, including a flared-out trigger that you can operate with only two fingers allowing for the index reach. With this item, there is no need for constant maintenance since it has an oil-free design. The low maintenance reduces the clean-up time and the associated cost. Like in the first question above, you can’t tell which of these two tools is better. Instead, go for the one that best suits your project. There are three kinds of nails for roofing nail guns in 10, 11, 12-gauge. If you want to nail your roofing shingles or cedar shingles, you can use a 12 gauge roofing nailer. You have to know the nail gun gauge chart before you are buying your nail guns. It is imperative to know your nail gun before you press the trigger. You may use the wrong size nailer in your projects. The nail gun gauge guides you to the right nail every time. Frequently Asked Questions Are you working on your baseboards, cabinets, chair rails, wood furniture, decorative trim, millwork, and paneling? Well, you need this Bostitch FN1664K finish nailer, and you will find such tasks a breeze.

If you need the solid 16-gauge pneumatic finish nail, that will give you features that match the price, then try this product, Porter-Cable FN250C. You can use this finish nailer on many different projects such as trim, ceiling tiles, and a lot more. Among the nail guns, a brad nail gun is one of the most versatile nail guns. It is a beginner-friendly nailer. Because it is not heavy like other nail guns and also does accurate nailing.It gives you a Pro-Grade depth of drive adjustment that drives to a range of 1-1/4 – 2-1/2 inch, 16 gauge nails. One fascinating thing about this tool is that it does not need a hose or compressor; hence it gives you total freedom. Furthermore, this tool has a no-mar tip for the protection of the surfaces against dinging and scratching. The angled magazine on this tool makes it a lot easier to work in confined spaces. Here are some finer details that you need to know about finish nailers, they are vital in ensuring that you get the best performing products possible. Headless Pins The finest pins in our range and are 23 Gauge. (0.64mm in diameter) They have (you guessed it!) no head, and are fantastic for beadings and mouldings and because they’re headless, the finish is almost invisible…………. No unsightly wood fill. Sometimes referred to as a Micro Pin. They’re becoming more popular and surprisingly, give a lot of holding power. (although glueing is still advised) It’s currently available on our range in lengths from 12mm – 28mm.

The name needs no introduction, and it is time to get excited as RIDGID introduces another addition to the HYPERDRIVE series of nailers. It is one of the best 16 gauge finish nailers that you can buy today with an 18-Volt. This kit from Bostitch comes with one of the best 16 gauge finishes that you should consider buying if you are looking for this model of a finish nailer. It has the ability to drive 1-¼ inches to 2-½ inches 16GA nails effortlessly. The nose of this amazing tool is quite small, which is excellent for easy nail placement. It has an air duster switch that lets in the air into the compressor hence minimizes nailing dysfunction. Therefore, this tool allows for the automatic clearing of dust in working areas. Metabo HPT Finish Nailer Kit, 16 Gauge, Finish Nails - 1-Inch up to 2-1/2-Inch, Integrated Air Duster, 5-Year Warranty (NT65M2S)Gauge Angled Brads The largest Brads available and are 1.9mm in diameter, these are are the D Head Angled 15 Gauge Brads. The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) = 0.1% published by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table With the stronger shank and larger head these finish nails are used for fixing skirting and architraves. Downside of Using a Finish Nail